3 bar map senser

[steveobes]

trying to find 3bar map senser to fit 2.5 noble,cant seem to find anything on forum .nothing on original to say who makes it.need a bit of help.

[Mike Tuckwood]

steveobes said:

trying to find 3bar map senser to fit 2.5 noble,cant seem to find anything on forum .nothing on original to say who makes it.need a bit of help.

You can use any really, the one used on the 3.0L is a GM unit, but you will need to completely re-map the ECU from scratch once installed.


Mike

[steveobes]

Thanks Mike, senser is housed in plastic casing which is fixed with 2 pozi bolts the ones iv seen would not fit mine. do you keep casing and replace components inside or am i missing something here. Many thanks steve

[Mike Tuckwood]

steveobes said:

Thanks Mike, senser is housed in plastic casing which is fixed with 2 pozi bolts the ones iv seen would not fit mine. do you keep casing and replace components inside or am i missing something here. Many thanks steve

I'll have a look at the pic's we took of the 2.5 Head gasket job we did last week, see if they are different. I'm assuming they are?
Easy to test with an AVO meter and a mityvac if not?


Mike.