Discussion
which selector specifically?
Remember the air box on Nobles is not of the pre-mix (?) type and the hot water through the heater matrix is 'controlled' by a valve that is accessed in the centre tunnel from underneath the car.
I would check this first, taking the heater box out or even worse the dash front would be a complete b
d if you didn't need to do it.
F.C.
Remember the air box on Nobles is not of the pre-mix (?) type and the hot water through the heater matrix is 'controlled' by a valve that is accessed in the centre tunnel from underneath the car.
I would check this first, taking the heater box out or even worse the dash front would be a complete b
d if you didn't need to do it.F.C.
i have got the same problem...the cable that ajusts the flaps is fitted on top of the heater box under the dash, i can just about get my hand on it, the clip that holds the cable end to the flap operator has broke....does anyone know if noble used a ford clip, seeing that the controls are escort
Gassing Station | Noble | Top of Page | What's New | My Stuff


