Rover V8 water pump pulley
Discussion
Hi guys does anyone know where I can get a V-belt type water pump pulley from for a range rover type water pump???
Its the one thats held on by 3 bolts with a large offset to line up with the other pulleys.
I have just had to repace my old pump as the water wasnt moving at all, but some pikey had welded the old pulley directly to the old shaft as it had no bolts, god knows why, so It wont fit the new one!
thanks in advance
Its the one thats held on by 3 bolts with a large offset to line up with the other pulleys.
I have just had to repace my old pump as the water wasnt moving at all, but some pikey had welded the old pulley directly to the old shaft as it had no bolts, god knows why, so It wont fit the new one!
thanks in advance
109 Bob said:
Obviously I have not seen your pulley or weld, but would it not be possible to cut/grind the pulley wheel off the old shaft?
Hi bob, the old pulley is unfortunately nackered, i ground back the weld and then tried to tap it off with a hammer, but as they are rather delicate the dam thing cracked.cobra.mad said:
Hi
I would be happy to make a copy see my ebay listing number 120475372352
it would likely be best to let me have the existing one, even if broken, so I can make a copy.
Let me know if this is any good and I will let you know contact details etc.
regards
Steve
hi steve, I think jim at jrv8 has sorted me out, once I pay him that is. Not only did I not have a pulley but had got hold of the wrong pump too !! . I just want to get the project in 1 piece and running/moving first, but once I have I think a snazzy billet pulley would look really good, so I'll keep a watch on your listing, thanks for the help!I would be happy to make a copy see my ebay listing number 120475372352
it would likely be best to let me have the existing one, even if broken, so I can make a copy.
Let me know if this is any good and I will let you know contact details etc.
regards
Steve
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff