Funding a startup
Author
Discussion

BigBen

Original Poster:

12,161 posts

261 months

Wednesday 7th October 2009
quotequote all
Interested to know the methods available to fund a business start up. I have a lot of knowledge of the technology and engineering side of the business but much less so on the finance / fundraising side. So questions are:

-What is the best way to raise say £150k to get a product into manufacture and generate some sales

-If you get investment from angels are you allowed to take a salary, happy to flog cars etc but have mortgage / eating commitments!

-Any online guides to writing a business plan or recommended books ?

Thanks in advance for any help

Cheers

Ben

bonsai

2,015 posts

211 months

Wednesday 7th October 2009
quotequote all

BigBen

Original Poster:

12,161 posts

261 months

Thursday 8th October 2009
quotequote all
bonsai said:
Sadly my idea is unlikely to make good television and is too complicated for anyone Scotch so for that reason they are out.

JustinP1

13,364 posts

261 months

Thursday 8th October 2009
quotequote all
Why do you need £150k?

That amount will be prohibitive compared to say £15k and will offer a lot less risk and more flexibility.

seaninog

513 posts

220 months

Thursday 8th October 2009
quotequote all
If you are just starting out with a new idea then the traditional source of seed finding for new ventures is typically referred to as the 3 F's: Friends, Family & Fools.

Seriously, at this early stage (and assuming you have no entrepreneurial track record) it is very difficult to get funding from anyone outside this category. There may be government grants available depending on where in the UK you are (Wales gets lots of grants, for example, London none) and what sector you are in (manufacturing does better than financial services) but I wouldn't like to give the impression that these are easy to get; they're not. There may also be a regional development fund that can help you out so contact your local Business link for details on his.

But for private sector funding there aren't many sources other that the 3 F's. I've been Angel investing for over 7 years and this is how I've seen the system traditionally work.

Good Luck!

ATG

23,878 posts

303 months

Thursday 8th October 2009
quotequote all
As an alternative, if you've got a specific product in mind, can you protect the idea (e.g. patent) and then try partnering with an existing engineering firm or manufacturer?

Engineer1

10,486 posts

240 months

Thursday 8th October 2009
quotequote all
Get a business plan written, speak to business link or similar, talk to banks but you will almost certainly need your business plan. As others have said look at getting a manufacturer to build the bits, if you want to protect the product get the components manufactured at different compaanies, assemble yourself, this assumes your product is an assembly this may bring start up costs down.
Whatever you do get better quality advice than piston heads and loo at business link or similar as it is free advice.

V8mate

45,899 posts

220 months

Thursday 8th October 2009
quotequote all
Engineer1 said:
Whatever you do get better quality advice than piston heads and loo at business link or similar as it is free advice.
So... what you're saying is... don't ask for advice from a group with a large contingent of successful business owners, but do ask for advice from a State quango.

Fair enough. Opinion, entitled etc.

Windsorphil

888 posts

293 months

Thursday 8th October 2009
quotequote all
Friends and Family, plus you'll have access to cash yourself.

For others to invest there are some excellent schemes such as EIS and CVS that give tax breaks to individuals and companies.

Your richer friends and companies are getting little return on their savings and if they trust you and they understand that it's risk capital and they like the idea - you'll be surprised at who will be willing to invest...

BigBen

Original Poster:

12,161 posts

261 months

Thursday 8th October 2009
quotequote all
JustinP1 said:
Why do you need £150k?

That amount will be prohibitive compared to say £15k and will offer a lot less risk and more flexibility.
£150k is a figure I pulled out of the air in absence of a business plan. However it is probably not too far off for developing a consumer product including tooling plus buying the first 1000s of units that are manufactured.

I assume raising funds becomes easier with LoIs from customers. Patenting the technology is also a possiblity and would presumably make the idea more attractive to investors.

I will contact my local business link and see what they say, have to be slightly careful as my employer is fairly high profile in this region and may or may not be supportive of me p*ssing off to start on my own (non competitive industry)

Ben

john_p

7,073 posts

281 months

Thursday 8th October 2009
quotequote all
BigBen said:
£150k is a figure I pulled out of the air
If you ever want to get investment, never ever ever ever use this sort of talk again! wink

If you don't know EXACTLY what you want, and WHY, you will get nowhere with anyone, friends, banks, angels, whoever.

BigBen

Original Poster:

12,161 posts

261 months

Thursday 8th October 2009
quotequote all
john_p said:
BigBen said:
£150k is a figure I pulled out of the air
If you ever want to get investment, never ever ever ever use this sort of talk again! wink

If you don't know EXACTLY what you want, and WHY, you will get nowhere with anyone, friends, banks, angels, whoever.
I quite agree and would not dream of approaching anyone on a serious basis without having done my homework properly although £150k will be the right order of magnitude. Thought it would be ok for the less formal environs of PH!

Ben

Engineer1

10,486 posts

240 months

Thursday 8th October 2009
quotequote all
V8mate said:
Engineer1 said:
Whatever you do get better quality advice than piston heads and look at business link or similar as it is free advice.
So... what you're saying is... don't ask for advice from a group with a large contingent of successful business owners, but do ask for advice from a State quango.

Fair enough. Opinion, entitled etc.
Pistonheads threads can degenerate quitye quickly into why do we need manufacturing, why not go to your wallsafe and get it out of petty cash, PH can give you links to people who you can talk to off site, EricMC seems to know his stuff acountancy wise etc, but business link have people who specialise in new setups so may be able to advise on what to do when for your best advantage, they also tend to know of funding etc. Finding a manufacturer or a supplier via pistionheads is good sense as they are likely to understand when the OP goes off and buys their sports car.

singlecoil

35,901 posts

277 months

Thursday 8th October 2009
quotequote all
BigBen said:
too complicated for anyone Scotch so for that reason they are out.
Glad I didn't say that! (I might have thought it, but I didn't say it)

rich1231

17,340 posts

291 months

Thursday 8th October 2009
quotequote all
How many people are starting a biz without a clue how to 1) establish the costs 2) be sure there is a market, and 3) communicate both effectively to possible investors?

Mattt

16,664 posts

249 months

Thursday 8th October 2009
quotequote all
Does it involve pasties?

BigBen

Original Poster:

12,161 posts

261 months

Thursday 8th October 2009
quotequote all
Mattt said:
Does it involve pasties?
I may eat the odd one for lunch whilst working but no plans for a retail premisis in Bury.

rich1231 said:
How many people are starting a biz without a clue how to 1) establish the costs 2) be sure there is a market, and 3) communicate both effectively to possible investors?
Personally I am confident I can establish the costs very accuratly, pricing up product development jobs is part of my day to day work. I am also confident there would be a market as I have done a fair bit of work in the sector.

Point 3 is where I suspect I would need help, not so much in communicating 1 and 2 at a basic level but in what conditions / expectations early stage investors might have.

I do come across a lot of folks who seem to have failed to address 1, 2 or 3 and still have investment so I feel there is some hope.

Cheers

Ben

Redarress

730 posts

238 months

Thursday 8th October 2009
quotequote all
have to say the only time Ihave had dealings with Busines Link ,which was a few years ago, I had more idea than they did ! Hopefully things they are much better now as we need to stimulate a many business startups as possible .

stuart-b

3,651 posts

257 months

Friday 9th October 2009
quotequote all
Redarress said:
have to say the only time Ihave had dealings with Busines Link ,which was a few years ago, I had more idea than they did ! Hopefully things they are much better now as we need to stimulate a many business startups as possible .
BusinessLink were utterly clueless.

Your best bet is to try and get some sort of prototype developed first, as a proof of concept. I don't think anyone will give you 150k for an idea.

Are you able to get drawings done in CAD and then get a machine shop to develop a prototype with a CNC machine, etc?

With a working concept you may be able to apply for patents (?) and therefore have a solid foundation to ask for 150k ...

Also, market research, establish your market, so the potential investor knows the ROI... No point having a product no one will buy.

Good luck!

Engineer1

10,486 posts

240 months

Friday 9th October 2009
quotequote all
Practical idea here, depending on what your product is look at rapid prototyping CNC or even a local machine shop, get the drawings done in CAD, there are a few people on here who can do this for you. Infact that's the business i'm looking at setting up, along with contacts with rapid prototyping companies.