VIN No.

[CiderwithCerbie]

The VIN on my Cerbera speed 6 is easily visible in the engine bay, but is it stamped anywhere on the chassis?
Apparently VIC Roads need to know before I register it in Oz.
Thanks for the info is you have it,
CwC

[ridds]

Possibly on the 2 front chassis rails by the rad, or on the front/rear faces of the front uprights that support the tops of the struts.

[peteA]

ridds said:

Possibly on the 2 front chassis rails by the rad, or on the front/rear faces of the front uprights that support the tops of the struts.

My 98 car has the chassis number stamped on the O/S front suspension upright.

[Ireland]

Mine has a (very) small hand-made plate welded onto the chassis somewhere near the front of the car.

It's about 10mm x 40mm with a number stamped onto it with a set of number-punches and a lump hammer.

Seriously high-tech.

I'd have to search to see exactly where but I know it's there somewhere.

[Mr.Cerbera]

Mine (2001 4.5) is stamped on the front left of the the front Chassis crossmember. Needed to get the F1 panel off to see it.

[JensenA]

I'm sure the VIN number is only on the plate in the engine compartment. The number on the chassis is the Chassis number (isn't it??)