MW2 graphics problem ps3
MW2 graphics problem ps3
Author
Discussion

okgo

Original Poster:

42,127 posts

227 months

Tuesday 17th November 2009
quotequote all
Hi guys,

Hoping someone has read about or could shed some light on my issue.

Last night I fired up the ps3 as usual, and went online, about 5 mins in its started artifacting all over the screen (which for those that don't know is king of flickering and rendering stufff that isn't there and such)..

I pulled the console out and put it on the side as I thought it might be overheating, but it still did it?

I'll try again after work but does anybody have any ideas?

okgo

Original Poster:

42,127 posts

227 months

Wednesday 18th November 2009
quotequote all
BUMP

Please frown

NateWM

1,742 posts

208 months

Thursday 19th November 2009
quotequote all
Sounds like a GPU error. If it is doing it straight from cold, then it sounds terminal.

Get it sent off for a replacement.

EDIT: Just as an off chance, try rolling back to a previous update or any previos console settings that you know worked.

As an off chance, do you have any little games installed onto your Hard Drive? Do you still get artifacts when playing these? If not, then it could possibly be a problem with the disc reader. Does it still do it when playing a DVD or BluRay movie? Something like the optic lense could be kaput, resulting in the rendering information to be corrupted as it is put onto your screen, causing the artifacts.

Edited by NateWM on Thursday 19th November 01:22

scorp

8,783 posts

258 months

Thursday 19th November 2009
quotequote all
NateWM said:
Something like the optic lense could be kaput, resulting in the rendering information to be corrupted as it is put onto your screen, causing the artifacts.
For 3d graphics a dodgy blu-ray would cause the game to error, the data files have error detection. Artefacts are likely caused by a malfunctioning GPU.

okgo

Original Poster:

42,127 posts

227 months

Thursday 19th November 2009
quotequote all
I should note that is was fine before the latest update..

How do I roll back to previous update?

I'll try it with other games tonight.. In terms of sending it off, where do they go? And if its over a year am I likley to get done £££?

Edited by okgo on Thursday 19th November 09:25

NateWM

1,742 posts

208 months

Thursday 19th November 2009
quotequote all
scorp said:
NateWM said:
Something like the optic lense could be kaput, resulting in the rendering information to be corrupted as it is put onto your screen, causing the artifacts.
For 3d graphics a dodgy blu-ray would cause the game to error, the data files have error detection. Artefacts are likely caused by a malfunctioning GPU.
Yes, sorry about that. I actually meant to say general errors, like slow loading or blurry/missing textures. Anything like that could be the cause of a fauly drive or disc.

Either way, it does sound like the most likely cause is the GPU.