Discussion
I think this is the right place to put this... just wondering if anybody had anyideas as to how i can resolve my problem.
My focus's bonnet catch is not working, you can turn the key and ...nothing, i was just wondering if anyone could shed any light... or if anyone new how i could remove the front grill to get at the lock.
Cheers
Rich
My focus's bonnet catch is not working, you can turn the key and ...nothing, i was just wondering if anyone could shed any light... or if anyone new how i could remove the front grill to get at the lock.
Cheers
Rich
Have you tried giving it a good jiggle around, both in and out as well as side to side? Mine is sometimes a bit sticky
Failing that, try spraying the barrel with WD40 or maybe even putting some lock grease on the key?
Failing that, jack the car up and do whatever you're trying to do from underneath
Failing that, try spraying the barrel with WD40 or maybe even putting some lock grease on the key?
Failing that, jack the car up and do whatever you're trying to do from underneath

Edited by The Wookie on Friday 20th November 11:51
What age of Focus is it? If its a mk2 and the grille has been disturbed then a little plastic rod could of come out of the lock rendering the barrel useless. You can undo the bonnet from underneath by unbolting the lock from the slam panel. X2 10mm screws. The MK1 is also of a similar design.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff




