SAS POWER BOAT
Author
Discussion

topsparks

Original Poster:

1,202 posts

276 months

Sunday 29th November 2009
quotequote all
I have finally got my mates boat back to mine,its been sitting in a field for about 18 years,his mother in law has sold the land where it was stored so he has given it to me!
Its a a 26'martini/corsa powered by a 5.7 mercruiser V8 engine.The last time we used it it was hitting about 70mph.I have bought a late mercruiser engine for it and have a newer trailer aswell.
The trim has sufferd as its been outdoors and rearlly needs retriming so if anyone can help me out with this they are welcome to join us for lots of skiing etc next year-I also have a parachute to stick on the back so testpilots are welcome. (I think nonuts should be the guinea pig!)
I had the GingaNinja pop round today and despite the fact that it has a CAST IRON engine he's chomping at the bit to drive it(if its any consolation my dog bit him,so he must be a good judge of character).We should have a good time next year if we have any sunshine,is there still no speed limit on the tidal thames?.

tuscan_al

4,112 posts

243 months

Sunday 29th November 2009
quotequote all
topsparks said:
I have finally got my mates boat back to mine,its been sitting in a field for about 18 years,his mother in law has sold the land where it was stored so he has given it to me!
Its a a 26'martini/corsa powered by a 5.7 mercruiser V8 engine.The last time we used it it was hitting about 70mph.I have bought a late mercruiser engine for it and have a newer trailer aswell.
The trim has sufferd as its been outdoors and rearlly needs retriming so if anyone can help me out with this they are welcome to join us for lots of skiing etc next year-I also have a parachute to stick on the back so testpilots are welcome. (I think nonuts should be the guinea pig!)
I had the GingaNinja pop round today and despite the fact that it has a CAST IRON engine he's chomping at the bit to drive it(if its any consolation my dog bit him,so he must be a good judge of character).We should have a good time next year if we have any sunshine,is there still no speed limit on the tidal thames?.
Sweet,

I'm in for helping,have my RYA powerboat ticket. No speed limit once past the barriers biggrin

topsparks

Original Poster:

1,202 posts

276 months

Sunday 29th November 2009
quotequote all
Good stuff, looks like I will have to ship across my chevy supercharger thats at my friends in the states!,any good trimmers on base!

tuscan_al

4,112 posts

243 months

Sunday 29th November 2009
quotequote all
topsparks said:
Good stuff, looks like I will have to ship across my chevy supercharger thats at my friends in the states!,any good trimmers on base!
hmm dont think so, but I know of a guy who is a tvr man in Yately.

Sods Law

3,280 posts

254 months

Sunday 29th November 2009
quotequote all
tuscan_al said:
topsparks said:
I have finally got my mates boat back to mine,its been sitting in a field for about 18 years,his mother in law has sold the land where it was stored so he has given it to me!
Its a a 26'martini/corsa powered by a 5.7 mercruiser V8 engine.The last time we used it it was hitting about 70mph.I have bought a late mercruiser engine for it and have a newer trailer aswell.
The trim has sufferd as its been outdoors and rearlly needs retriming so if anyone can help me out with this they are welcome to join us for lots of skiing etc next year-I also have a parachute to stick on the back so testpilots are welcome. (I think nonuts should be the guinea pig!)
I had the GingaNinja pop round today and despite the fact that it has a CAST IRON engine he's chomping at the bit to drive it(if its any consolation my dog bit him,so he must be a good judge of character).We should have a good time next year if we have any sunshine,is there still no speed limit on the tidal thames?.
Sweet,

I'm in for helping,have my RYA powerboat ticket. No speed limit once past the barriers biggrin
Ditto, do you need a throttleman

John D.

20,933 posts

238 months

Sunday 29th November 2009
quotequote all
This sounds like fun thumbup

shimmey69

1,525 posts

207 months

Sunday 29th November 2009
quotequote all
happy to help out with some elbow grease and man power, but sounds like fun!!!

Robatr0n

12,362 posts

245 months

Monday 30th November 2009
quotequote all
Oddly enough, I was wondering what had happened to this project only last week.

Sounds good! If you need a hand with anything, give us a shout. smile

SVTRick

3,633 posts

224 months

Monday 30th November 2009
quotequote all
Hopefully as it's a Merecruser system it should have cooling water heat exchangers which avoid sea water going through the block.
These enable the motor to run at correct operating temprature, and keep the salt out of the vital parts.

Post up some photos



Sods Law

3,280 posts

254 months

Monday 30th November 2009
quotequote all
topsparks said:
The trim has sufferd as its been outdoors and rearlly needs retriming so if anyone can help me out with this
Can you post somepics and what sort of materials need triming, used to do a bit of this on Demo cars...

nonuts

15,855 posts

258 months

Monday 30th November 2009
quotequote all
James as you know, happy to help out with whatever I can thumbup

twiglove

1,178 posts

223 months

Monday 30th November 2009
quotequote all
Also willing to help with anything - Need a tow vehicle smile

topsparks

Original Poster:

1,202 posts

276 months

Monday 30th November 2009
quotequote all
SVTRick said:
Hopefully as it's a Merecruser system it should have cooling water heat exchangers which avoid sea water going through the block.
These enable the motor to run at correct operating temprature, and keep the salt out of the vital parts.

Post up some photos
I also have a Mercruiser closed cooling kit (heat exchanger)in the States along with a Mercruiser high5 5 blade stainless prop,presently engine is cooled by raw water,but has only run in fresh water.
Despite Bens and Jons best efforts still not got a clue how to post pis!

topsparks

Original Poster:

1,202 posts

276 months

Monday 30th November 2009
quotequote all
Sods Law said:
topsparks said:
The trim has sufferd as its been outdoors and rearlly needs retriming so if anyone can help me out with this
Can you post somepics and what sort of materials need triming, used to do a bit of this on Demo cars...
The plywood backing has roted and needs replacing with marine ply,the vynal and foam backing seems ok but mild steel staples have been used and these need to be replaced with stainless steel staples.The floor to the main tub need replacing also.As I run a builders merchants I can get hold of proper marine ply no problem.
The main job will be to strip out the seats and carpet and replace the floor.The engine cover also needs replacing as I put my foot through it Sunday showing Jellison the boat!.

kiwifraser

4,388 posts

223 months

Monday 30th November 2009
quotequote all
nonuts said:
James as you know, happy to help out with whatever I can thumbup
Add me to the list of helpers too if you need anything. I've spent a good number of years either with my head under marine engine covers, behind the wheel, or hanging off the back at speed (with a rope and ski, rather than by accident wink )

topsparks

Original Poster:

1,202 posts

276 months

Tuesday 1st December 2009
quotequote all
Thanks for all the offers of help!,looking forward to some lighter evenings/warmer weather so we can get stuck in.

bored-of-coding

1,292 posts

226 months

Tuesday 1st December 2009
quotequote all
I can prob. help here as well .. most of my non-working life has been spent behind a boat at speed too!
I can get you some testing time on a local ski lake for a nominal fee (have to be very off peak, but that's not difficult to achieve here)


edited to correct my grammar etc

Edited by bored-of-coding on Tuesday 1st December 17:49

Sods Law

3,280 posts

254 months

Tuesday 1st December 2009
quotequote all
Well the retrimming in those materials is no issue, maybe we should have a pub lunch meet one sunday to colectively have a gander.

Why dont my mates give me things like this, nono

If this is like the one I played with at Rib-X the other year then this is a very fast boat, the hull is more suited to the flatter med waters than the crappy tidal stuff we have here, but once up and out should seriously shift!

Is it still in Martini colours?

We need another chase boat though so we can do lunch hoons to the channel island or St M! hehe

hmmmm

VerySideways

10,268 posts

301 months

Tuesday 1st December 2009
quotequote all
I'm happy to help with the parachute testing - i have experience in this area biggrin

Snoggledog

9,255 posts

246 months

Tuesday 1st December 2009
quotequote all
What sort of re-trimming? If it's woodwork I'm good with a hot air gun, scraper and the old Epifanes.