Dishwasher problems - Prima LPR600

[The Fly Fisher]

I've acquired a Prima LPR600 dishwasher with my new house (which is Whirlpoool, as far as I can work out). It must be anything up to 16 years old and is integrated with the kitchen units. It's been okay for a while, but now when the selected programme starts it beeps repeatedly, a warning light flashes, and it changes to the rinse cycle.

The instruction manual is useless and I'm going to have to order a replacement tomorrow (last expense I need at this time of the year), but does anyone know how I can bypass this issue or make it work just now?

[robinhood21]

Have a look Here as it might be of help.

[The Fly Fisher]

Thanks - tried that, and a few other posts on that site...

Cheers anyway!

[Duke Thrust]

Have you tried cleaning the filters etc?

Could be telling you something is blocked?

[freecar]

http://ukwhitegoods.co.uk/modules.php?name=Forums&...


Try here.

Basically there are a number of sensors that will operate the dishwasher, one of these is not sending the correct signal so the machine aborts the run.

There is an error code on this machine that may tell you which signal caused the abort but you'll still need to check it all over thoroughly as the code is only an indication of the symptoms of non operation. There will still be a reason for the abort (blocked pipe, pin hole in pipe etc)

good luck