Wiper motor removal
Discussion
As per igreenrover's instructions, Ive removed the white cover and can see that crummy nylon gear. He then states to jam the gear and remove the nut securing the mechanism to the pivot. I can't find the nut, is it between the motor and the triangler mounting bracket or above the bracket. I'm unable to see up there and can't tellwhat size spanner to use.
Help... My neck is killing me
Help... My neck is killing me
The nut is right on the front of the unit and secures the gearbox pivot to the mechaninism (its on the end of the bar that goes to the other side of the car). Once you can get the unit moved a little away from the bulkhead then you should be able to feel it?
I can't remember the size but I think its either 12 or 13mm.
I know, its a nightmare of a job (I gave up four times but had to get it sorted in the end as it was parking in the middle of the screen!).
Mail me if you need any more help.
Gareth
I can't remember the size but I think its either 12 or 13mm.
I know, its a nightmare of a job (I gave up four times but had to get it sorted in the end as it was parking in the middle of the screen!).
Mail me if you need any more help.
Gareth
Gassing Station | Esprit | Top of Page | What's New | My Stuff