Problem with heaters not blowing in t350
Problem with heaters not blowing in t350
Author
Discussion

gwionsavill

Original Poster:

18 posts

202 months

Wednesday 16th December 2009
quotequote all
As title says really, when I turn the control for the fan on to any setting nothing changes, no air comes out.

Was wondering if anyone has any ideas or is there a common problem.

thanks for any advise.

Waitey

1,143 posts

251 months

Wednesday 16th December 2009
quotequote all
Pull the carpet at the back of the passenger side footwell off and check the two capasitors are still attached to the control unit.

Targarama

14,784 posts

312 months

Wednesday 16th December 2009
quotequote all
Has it ever worked? The first very simple thing is to make sure you have pressed the button to turn on/off the fan motor.

gwionsavill

Original Poster:

18 posts

202 months

Wednesday 16th December 2009
quotequote all
yes it worked fine yesterday, put in the garage over night and now not working.

thanks for the advice ill have a look tonight about the capasitors

TVRWazzock

1,653 posts

252 months

Saturday 19th December 2009
quotequote all
shoutCapacitor

Had this and found that the connector on the heater fan amplifier board was badly chard. Bad design nono

Ended up replacing the capacitors and repairing the connector. Now works fine.

Targarama

14,784 posts

312 months

Saturday 19th December 2009
quotequote all
TVRWazzock said:
shoutCapacitor

Had this and found that the connector on the heater fan amplifier board was badly chard. Bad design nono

Ended up replacing the capacitors and repairing the connector. Now works fine.
CHARRED shout

Chard is a place down in Somerset or near there smile

hehe

x 7usc

1,443 posts

224 months

Saturday 19th December 2009
quotequote all
give this a go from the tuscan forum

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

TVRWazzock

1,653 posts

252 months

Saturday 19th December 2009
quotequote all
Targarama said:
TVRWazzock said:
shoutCapacitor

Had this and found that the connector on the heater fan amplifier board was badly chard. Bad design nono

Ended up replacing the capacitors and repairing the connector. Now works fine.
CHARRED shout

Chard is a place down in Somerset or near there smile

hehe
getmecoat

rofl