replacement veneers for the tasmin
Discussion
I've started this new thread so it does not get confusing, is anybody interested in a new set of veneers for their tasmin 280/350/390.(glove box main dash and radio dash)
I have recently organised veneers for the 400/450 ,everybody seemed to be happy with their purchases (i have a very small number left).
We may get a mix of requirements as they are TVRs, lets see.
So far i have sent samples of the veneer on offer and templates from my 350 (1987)
to
Andy /mr tank (400 style glove box and round clock)
Ian/wedg1e (same as above)
these small differences will not alter the estimated cost of £60 each but we need 10 folks to keep it this low.
Register your interest and email me your address .
I have recently organised veneers for the 400/450 ,everybody seemed to be happy with their purchases (i have a very small number left).
We may get a mix of requirements as they are TVRs, lets see.
So far i have sent samples of the veneer on offer and templates from my 350 (1987)
to
Andy /mr tank (400 style glove box and round clock)
Ian/wedg1e (same as above)
these small differences will not alter the estimated cost of £60 each but we need 10 folks to keep it this low.
Register your interest and email me your address .
Easy to fit depending on your glove box style. Still then it would be just a little more work then the newer style ie leather/vinyl surround.
The main and radio veneers after fitting would have to be painted on the inside of each opening to completely finish.
These are pre-finished (not real wood but once fitted you wouldn't no the difference, they are that good).
I have fitted my 3 dash set on my 400 (its on a thread some where not to far back)
The main and radio veneers after fitting would have to be painted on the inside of each opening to completely finish.
These are pre-finished (not real wood but once fitted you wouldn't no the difference, they are that good).
I have fitted my 3 dash set on my 400 (its on a thread some where not to far back)
Waynester we couldn't leave you out this time ,email me your address and i will post the template for the RPM bit and the glove box complete with a sample .If the veneers go ahead for the tasmin you will have to send me your centre metal dash .
benbob and gavin could you both post up a single pic showing your dash /glove box and radio bit before i send a template.
I will not be able to get the door handles done, sorry.
benbob and gavin could you both post up a single pic showing your dash /glove box and radio bit before i send a template.
I will not be able to get the door handles done, sorry.
waynester good news for you , if i received your metal dash front by the lastest monday the veneers could be completed for your car by the end of next week. I have managed to get this done so quickly because i had a very small amout of the veneer left over (luckly enough to complete yours)
The cost will be the same at £60 because of the special set up for your main dash.
I will post tonight the sample and templates of the glove box and RPM bit, if you email me your address.(I then confirm my address for you to send the dash to)
cheers
Stephen
The cost will be the same at £60 because of the special set up for your main dash.
I will post tonight the sample and templates of the glove box and RPM bit, if you email me your address.(I then confirm my address for you to send the dash to)
cheers
Stephen
Look fab. 
convert i cannot supply pic's of the panels completed as they aren't, this thread is to work out who is interested,
then to work out how many variations we have of those interested
Then for me to firm a quote from a company with CNC's and divide that value by how many people request the new veneers.(max number being about 10 ,hopefully the cost will be about £60 each ,including delivery. As long as we don't give them too many options ).
I have posted already the pic's from my dash 350i 1987 (see thread "re-lamiating the dash" posted by andy/mr tank)
which is a page back.
Also posted my dash completed on my 400se (see thread "replacement dash for 400se" posted by me)
which is about 6 pages back.(i have found pic's before replacements fitted )
The template i offer is from my 350 ,this may not suit your car, so i would expect if it is different you would make a template or alter mine and send it back to me.
We may get 5 people with the same dash that i have, we my get 3 from a 85 ,4 from 89 which may be different but we will not no until interest is shown.
I do have some samples of the veneer proposed (the only one) which are the cut outs from the radios and clocks left over from the 400se dash run,these are big enough to see what you would be buying.
these would send with my paper templates
any questions don't hesitate to ask
then to work out how many variations we have of those interested
Then for me to firm a quote from a company with CNC's and divide that value by how many people request the new veneers.(max number being about 10 ,hopefully the cost will be about £60 each ,including delivery. As long as we don't give them too many options ).
I have posted already the pic's from my dash 350i 1987 (see thread "re-lamiating the dash" posted by andy/mr tank)
which is a page back.
Also posted my dash completed on my 400se (see thread "replacement dash for 400se" posted by me)
which is about 6 pages back.(i have found pic's before replacements fitted )
The template i offer is from my 350 ,this may not suit your car, so i would expect if it is different you would make a template or alter mine and send it back to me.
We may get 5 people with the same dash that i have, we my get 3 from a 85 ,4 from 89 which may be different but we will not no until interest is shown.
I do have some samples of the veneer proposed (the only one) which are the cut outs from the radios and clocks left over from the 400se dash run,these are big enough to see what you would be buying.
these would send with my paper templates
any questions don't hesitate to ask
HOTTY said:
waynester good news for you , if i received your metal dash front by the lastest monday the veneers could be completed for your car by the end of next week. I have managed to get this done so quickly because i had a very small amout of the veneer left over (luckly enough to complete yours)
The cost will be the same at £60 because of the special set up for your main dash.
I will post tonight the sample and templates of the glove box and RPM bit, if you email me your address.(I then confirm my address for you to send the dash to)
cheers
Stephen
Flipperty!! Not been checking the thread!The cost will be the same at £60 because of the special set up for your main dash.
I will post tonight the sample and templates of the glove box and RPM bit, if you email me your address.(I then confirm my address for you to send the dash to)
cheers
Stephen
Mailing now!
hi mike
I see this colloboration as a steam train ,slowly picking up pace as there maybe a need for a few paper templates to be made before we put in for manufacture.
We all want to be satisfied with what we purchase, so the end of the month, no problems but if you were to email your postal address back home i could get things going by sending you the sample and paper template i have.
Cheers
Stephen
I see this colloboration as a steam train ,slowly picking up pace as there maybe a need for a few paper templates to be made before we put in for manufacture.
We all want to be satisfied with what we purchase, so the end of the month, no problems but if you were to email your postal address back home i could get things going by sending you the sample and paper template i have.
Cheers
Stephen
what a titGassing Station | Wedges | Top of Page | What's New | My Stuff