I can't find the heater behind the dash...:-((
I can't find the heater behind the dash...:-((
Author
Discussion

panic

Original Poster:

817 posts

312 months

Friday 22nd January 2010
quotequote all
I've opened the dash completely and dismantled it but I can't find the heater nor its motor behind it...where are they? I'm in a full attempt of lightening my Griffith and I'm dumping anything is not strictly needed...

Thanks/Giuseppe

dnb

3,330 posts

271 months

Friday 22nd January 2010
quotequote all
The fan and motor is in the inner wing area just below the indicator side repeaters. It is accessed (with difficulty) through the passenger footwell via a rivited and sikaflexed panel.

panic

Original Poster:

817 posts

312 months

Saturday 23rd January 2010
quotequote all
dnb said:
The fan and motor is in the inner wing area just below the indicator side repeaters. It is accessed (with difficulty) through the passenger footwell via a rivited and sikaflexed panel.
Thanks...I guess then it's in the driver's footwell in my Griff as it's LHD...I just wanted to be sure before I start my ''excavations''smile

Barreti

6,689 posts

266 months

Saturday 23rd January 2010
quotequote all
If you take the light pod out this is what you should see



dnb

3,330 posts

271 months

Saturday 23rd January 2010
quotequote all
It'll still be the passenger side in your car Panic. From what I've seen of LHD Griffs, the body is a complete mirror image.

Baretti - mine looks nothing like that - is yours an early one? (ie pre 1996 changes)

Ant.

5,254 posts

310 months

Saturday 23rd January 2010
quotequote all
Barreti, our earlier cars are different, quite a bit in fact.
The later cars have everything contained in the passenger side footwell area.

spend

12,581 posts

280 months

Saturday 23rd January 2010
quotequote all
I wouldn't put money on the LHD cars following quite the same development path / timeline.... In fact it would be no surprise if they were even the other way round hehe

Certainly better to point out the different implementations and leave the owner to investigate when it comes to the LHD variants IMHO.

panic

Original Poster:

817 posts

312 months

Saturday 23rd January 2010
quotequote all
Ant. said:
Barreti, our earlier cars are different, quite a bit in fact.
The later cars have everything contained in the passenger side footwell area.
Mine is a '96 model...

Barreti

6,689 posts

266 months

Saturday 23rd January 2010
quotequote all
Ah, forget what I said, you've got one of the common-as-muck Griffiths wink

panic

Original Poster:

817 posts

312 months

Saturday 23rd January 2010
quotequote all
Barreti said:
Ah, forget what I said, you've got one of the common-as-muck Griffiths wink
Which means? I have the dash completely open,I thought the heater matrix, motor and ancillaries were behind it, should I fix it back in and forget about?

I'm getting pretty confused.

Barreti

6,689 posts

266 months

Saturday 23rd January 2010
quotequote all
Sorry Panic.

The early (pre-cat) cars have the heater matrix under the dash and the motor down underneath one of the headlight pods pushing air.

The later cars have the heater matrix in the same place under the dash but I believe the motor is attached to the matrix and pulls air up to it.

My apologies for causing you confusion Panic.

panic

Original Poster:

817 posts

312 months

Saturday 23rd January 2010
quotequote all
No problem Barreti...

Is there anyone who would have a clear pic of the matrix/motor position under the dash to post here pls?


Hedgehopper

1,542 posts

273 months

Sunday 24th January 2010
quotequote all
This pic. is of my '97 500. I assume that the black box is the heater matrix and fan combined. I have also been told that the switch on the front of the box is the inertia cut-off switch. Hope thjis info. helps.

panic

Original Poster:

817 posts

312 months

Sunday 24th January 2010
quotequote all
Hedgehopper said:
This pic. is of my '97 500. I assume that the black box is the heater matrix and fan combined. I have also been told that the switch on the front of the box is the inertia cut-off switch. Hope thjis info. helps.
Thanks, it looks like what I was looking for...