Edelbrock E-Force Supercharger

[paul450]

got this off the vxronline forum.

www.edelbrock.com/automotive_new/mc/superchargers/corvette/

check the vid's looks good.

what are peoples opinions on this one?

would it fit an vxr8

[doleboy]

If its not a kit for a Monaro then you'll most likely encounter issues with firewall/bonnet clearance, pulley clearance and alignment etc...

It's based on a TVS Eaton rotor, so why not just buy a Magnacharger TVS 1900 or 2300 from Rapid GB? Those kits are designed to fit.

[eliot]

Looks quite tidy actually and I like the way they have thought about the manifold and integrated the bypass into the casting.

[anonymous-user]

doleboy said:

Magnacharger TVS 1900 or 2300 from Rapid GB? Those kits are designed to fit.

The 2300 doesn't just bolt on. You lose the fire blanket and need to lower the engine. Mine also needed modifications to the transmission tunnel and baffles fitted in the gearbox. It can be made to fit though.

[Drew SS]

wormus said:

doleboy said:

Magnacharger TVS 1900 or 2300 from Rapid GB? Those kits are designed to fit.

The 2300 doesn't just bolt on. You lose the fire blanket and need to lower the engine. Mine also needed modifications to the transmission tunnel and baffles fitted in the gearbox. It can be made to fit though.

or u could have put it through the bonnet

[after_shock]

Drew SS said:

wormus said:

doleboy said:

Magnacharger TVS 1900 or 2300 from Rapid GB? Those kits are designed to fit.

The 2300 doesn't just bolt on. You lose the fire blanket and need to lower the engine. Mine also needed modifications to the transmission tunnel and baffles fitted in the gearbox. It can be made to fit though.

or u could have put it through the bonnet

Mmmmm thats an idea lol

[doleboy]

wormus said:

doleboy said:

Magnacharger TVS 1900 or 2300 from Rapid GB? Those kits are designed to fit.

The 2300 doesn't just bolt on. You lose the fire blanket and need to lower the engine. Mine also needed modifications to the transmission tunnel and baffles fitted in the gearbox. It can be made to fit though.

Yeah, but it fitted in the end right