Hydraulic Lift Kits

[Mjpmark]

Guys

Can anyone advise where to get a decent hydraulic lift kit for my GTR?

Cheers

Mark

[JoulesCanAm]

Fran Hall at RCR has designed a kit for the SLC that sits in the coilovers, should be equally suitable for an Ultima. Fran occasionally contributes on this forum, you can find him here....

www.racecarreplicas.com

Edited by JoulesCanAm on Saturday 30th January 16:31

[craig7l]

this is the kit on my car but i am thinking of also adding it to rear to make it even more effective

http://www.ramliftpro.com/CustomersCars.html

Edited by craig7l on Saturday 27th February 12:23

[Steve_D]

craig7l said:

this is the kit on my car but i am thinking of also adding it to rear to make it even more effective

http://www.ramliftpro.com/CustomersCars.html

Look dead easy to install.

How long do they take to go full travel and what length have you fitted?

Do you have enough thread length on the shock to use the original spring?

Steve

[craig7l]

Steve_D said:

craig7l said:

this is the kit on my car but i am thinking of also adding it to rear to make it even more effective

http://www.ramliftpro.com/CustomersCars.html

Look dead easy to install.

How long do they take to go full travel and what length have you fitted?

Do you have enough thread length on the shock to use the original spring?

Steve

maybe around 5 or 6 secs? for fully up and i have the 2.5" which equates to slightly more lift at the nose.
needed shorter springs.
regards

[V8Dom]

craig7l said:

Steve_D said:

craig7l said:

this is the kit on my car but i am thinking of also adding it to rear to make it even more effective

http://www.ramliftpro.com/CustomersCars.html

Look dead easy to install.

How long do they take to go full travel and what length have you fitted?

Do you have enough thread length on the shock to use the original spring?

Steve

maybe around 5 or 6 secs? for fully up and i have the 2.5" which equates to slightly more lift at the nose.
needed shorter springs.
regards

Im interesting in these too, but if you run shorter springs will that not effect handling?..

Dom

[cliveg]

Craig, What length springs did you use?
Clive

[V8Dom]

craig7l said:

this is the kit on my car but i am thinking of also adding it to rear to make it even more effective

http://www.ramliftpro.com/CustomersCars.html

Edited by craig7l on Saturday 27th February 12:23

Are you thinking of entering the off road market as well??

Dom

[GTRCLIVE]

V8Dom said:

Im interesting in these too, but if you run shorter springs will that not effect handling?..

Dom

When you buy a Spring the lbs rating is based on compressing the spring by 1". If you see a long spring with the same lbs rating as a short one the long spring will be a thicker coil, basically as long as the rating is the same the length should not have an effect on the spring rates..... Hope that makes sense...

[craig7l]

cliveg said:

Craig, What length springs did you use?
Clive

2.5" smaller in length than i would have had without the kit

[robm3]

Mjpmark said:

Guys

Can anyone advise where to get a decent hydraulic lift kit for my GTR?

Cheers

Mark

Mark you grown up Chav, is this what you're after....

http://www.youtube.com/watch?v=nFUiEAPOqBI

[cliveg]

craig7l said:

2.5" smaller in length than i would have had without the kit

[cliveg]

craig7l said:

2.5" smaller in length than i would have had without the kit