Coilovers and Antiroll bars recomended

[ferb]

Just fitted Pedders Extreme XA coilovers and the adjustable antiroll bars.
The Ute now corners a lot flatter. It's firmer than before but not harsh and the shocks really work and keep up with the deveations in the road surface.
Many thanks to Monkfish and Roger for fitting advice


I can't wait to really push the Ute on the track

[gsd2000]

ferb, do yours creak a bit from the rear when cold.

Edited by gsd2000 on Sunday 7th February 19:57

[after_shock]

Looks good, have you done much with the ride height?

[ferb]

gsd2000 said:

ferb, do yours creak a bit from the rear when cold.

Edited by gsd2000 on Sunday 7th February 19:57

The creaking I get is from the uprated Polyurethane rear subframe mounts (rear end pack)
I'm going to speak to the Fish tomorrow about this to try and find a cure

[ferb]

after_shock said:

Looks good, have you done much with the ride height?

My car was lowered before so set the same at the front and 20mm lower at the rear. Measurements are taken from the bottom outer edge of the wheel to the wheel arch with 18" wheels - Rear 590mm. Front 575mm
This pic is with 17" BTCC tyres fitted, there 40mm smaller in diameter

[gsd2000]

Thats good to hear ferb as i thought id installed something wrong. The fish fitted most of my rear bushes with the extra shims on the rear subframe.

[jhinchy]

sounds good, what brakes have you got on it?

[ferb]

jhinchy said:

sounds good, what brakes have you got on it?

There Wilwoods with the name filed off and i made a little SS stencil.