Look what she bought me
Discussion
I had one of those Clarke lightweight trolleys. The seals went (after the warranty expired of course). I did inquire with thme if it was possible to repair but they said it would cost as much as a new one.
In the end I bought a SEALEY 2500LE Trolley Jack Yankee 2.5tonne Low entry for about £90 of ebay. Heavier but much stronger. Only downside is the lift rate is not as fast.
In the end I bought a SEALEY 2500LE Trolley Jack Yankee 2.5tonne Low entry for about £90 of ebay. Heavier but much stronger. Only downside is the lift rate is not as fast.
jimed said:
Machine Mart advertises an aluminium low entry height 1.25 tonne low entry jack which they claim is suitable for sports cars, etc. it is about £94. I've not got one but often wondered about one so could be worth a look.
Jim
I have one of these, if anyone else has for gods sake check the bolts are all still tight. The roller on the front practically fell off last weekend and when I check roughly 1/3 of the 20 or so bolts weren't even pinched and one other was already a good way out.Jim
Needless to say, they are all loctite'd in now.
Ah, should have read your comment too Quinny.
Jesus, thats a worrying story. I am already on my second after the first stopped within a couple of months
I know what you mean about jack, drop onto stand, jack with block, drop onto stand, jack with bigger block etc etc.
I'll look out for the chassis twisting when I drop the Griff off the stands at the weekend. If it does that too its curtains for it
Jesus, thats a worrying story. I am already on my second after the first stopped within a couple of months

I know what you mean about jack, drop onto stand, jack with block, drop onto stand, jack with bigger block etc etc.
I'll look out for the chassis twisting when I drop the Griff off the stands at the weekend. If it does that too its curtains for it

Gassing Station | Griffith | Top of Page | What's New | My Stuff





you got everything!