Car not starting...
Car not starting...
Author
Discussion

moschops_72

Original Poster:

439 posts

277 months

Wednesday 11th February 2004
quotequote all
I've seen a similar post on my same problem recently, but doing a search revealed nothing....

So, after a 20 odd mile drive to visit someone in hopsital, i parked the Tiv up... 20 mins later after a quick hello, i get into car, wait for the fuel pump to prime.... nothing
Friend with Lexus reverses back up... "what's wrong?" I explain the car don't wanna start "ahhh (in german accent) is this the TVR standard gremlin" swine... anyway, being always the optimist, i said since we've been in the hospital for about 20 mins, the car should start in about 10...
I kept trying during that time, wondering what was wrong with it.
Key in
ignition on
wait for fuel pump to prime
turn key
NOTHING, no clicking, no whirring, NOTHING!

10 mins later car starts!!! my mate thought i was taking the mickey when i told him about the "30 minute thang"
So, what's wrong?

Jeff

P.S. whilst driving upto the hospital, i noticed the outside temp lights flickering all over the place, and the temp sensor was reading unsually high temps, although in 0 degrees, i'm notmally running about 60.

Big Al.

69,336 posts

287 months

Wednesday 11th February 2004
quotequote all
Sound like a classic HOT START problem. OH
All the lights are on but there's nobody in?

Starter motor on it's way out, they get cooked by the heat.

Do a search using hot start in TVR (all) and see what you come up with.

Hope this helps.

ropey

372 posts

281 months

Thursday 12th February 2004
quotequote all
Sounds like the hot start issue to me. Happened to me all last summer. Been much better in this weather though!

New starter motor is required - so David Batty tells me!

5ltr-chim

635 posts

286 months

Thursday 12th February 2004
quotequote all
The waiting time gets longer and l o n g e r !
(I got to the point of TWO hours )

Cheap source HERE

I bought one of these as have a couple of others now.

To ensure a long life it's worth heat shielding the replacement.

david beer

3,982 posts

296 months

Friday 13th February 2004
quotequote all
Its also worth checking the supply to the solenoid, mine was only 6amps where it now takes 12 ! Its a simple test at the ignition switch and the mod can be done in the footwell.

moschops_72

Original Poster:

439 posts

277 months

Friday 13th February 2004
quotequote all


50 quid at Brookwell site.....

ready for german prices....

just called them, exact same part number....

about 400 quid!!!!!!!!!!!!

holy moly!!

larf, i nearly bought a round!

Jeff

david beer

3,982 posts

296 months

Friday 13th February 2004
quotequote all
You could try the test first, maybe the starter is fine, just not enough "juice" when the starter is hot, to pull in the solenoid.