E36 Roll Cage PROBLEMS!!

[georgedawes_007]

Morning, I have recently purchased a roll cage from Custom Cages. Tall story short there are no fitting instuctions supplied! Has anybody fitted one from custom cages? Has anybody got any fitting instructions Can anybody help me? Why is it that when I chew I still get a clicking sound in my jaw?

Thanks in advance,
Confused 30 W.Midlands

[TheEnd]

i think there is a rough line drawing on their website, and you hand a print out of that to a welder with your collection of poles.

The most important thing apart from welding it properly, is to build it inside the car sitting on the floor, then lift up, and weld the box section bits it'll sit on.
That's how they weld over the tops of the bars. I've known people start the wrong way and wonder how the good guys manage to weld in such tight spaces under the roof

[nitrodan]

Hi i fitted one to my e36 4dr lots of messing about, but i also changed mine to a bolt in cage i will see if i can find some fitting pics, i did have step by step pics on the laptop but it when wrong and had to restore it and lost all my pics

Edited by nitrodan on Wednesday 24th February 21:41

[Dominic H]

George, 'Sniff Petrol' has built an E36 track car, with a full cage.

http://www.pistonheads.com/gassing/topic.asp?h=0&a... Ring-shed E36 325i

He's a top PH'er, I'm sure he'd give you the benefit of his experience...

DH