Sag window not going fully up...

[JxT]

Title says it all really... cant get the window to close by c. one inch. Anyone got any suggestions?

(definitely no battery issues)

And, saving no easy fix, how easy is it to get at the window mechanism? And is the mechanism itself complex?

[al 350i]

should be the same as a T350, very easy to access window mechanism, under the bottom of the door there are 3 plastic gromets (remove these), undo the 3 screws (10mm socket), then pull out bottom of door card and pull down to release.

not sure on the sag but on cerberas it is usually one of two things, there is a door reed switch at the bottom of the door (small metal thread that makes contact with the inner sill) or the halt switch at the front of the window ( a small plastic micro switch). i would imagine that the sag uses a similar system.

Edited by al 350i on Friday 26th February 21:07

Edited by al 350i on Friday 26th February 21:08

[geoffphead]

my tam took around 10 resets on alarm button to get into correct mode. On my old t350t i had to unplug window ecu then do reset.
good luck