Dash Light stays on
Discussion
OK, new one on me - and posted on the Sag forum, but possibly fault found at some point with S6 Tuscan post 2005.
Switched off engine, go to get out of car, and dash light/handbrake light still on.
Start and stop to check, all lights etc off, and still on.
Lock/unlock car, still on.
Any ideas?
Switched off engine, go to get out of car, and dash light/handbrake light still on.
Start and stop to check, all lights etc off, and still on.
Lock/unlock car, still on.
Any ideas?
ronspeedsix said:
What I would do :
Check all your fuses first. Sometimes you get weird things in a TVR when a fuse has blown and the electrics find another way around.
Check connectors (corrosion/loose) around the dash area. I'm not familiar with the T2 so can't point out which connectors.
Ronald
Thanks for that - it is on the Sag, just wondered if anyone had the same experience with a Tusc. Check all your fuses first. Sometimes you get weird things in a TVR when a fuse has blown and the electrics find another way around.
Check connectors (corrosion/loose) around the dash area. I'm not familiar with the T2 so can't point out which connectors.
Ronald
Will probably pull the battery if it comes to it, as it will probably be dead by morning otherwise.
Edited by Overseas on Tuesday 2nd March 20:19
Overseas said:
ronspeedsix said:
What I would do :
Check all your fuses first. Sometimes you get weird things in a TVR when a fuse has blown and the electrics find another way around.
Check connectors (corrosion/loose) around the dash area. I'm not familiar with the T2 so can't point out which connectors.
Ronald
Thanks for that - it is on the Sag, just wondered if anyone had the same experience with a Tusc. Check all your fuses first. Sometimes you get weird things in a TVR when a fuse has blown and the electrics find another way around.
Check connectors (corrosion/loose) around the dash area. I'm not familiar with the T2 so can't point out which connectors.
Ronald
Will probably pull the battery if it comes to it, as it will probably be dead by morning otherwise.
Edited by Overseas on Tuesday 2nd March 20:19
Noticed that the control buttons do nothing, pod LCD readout stays at 2500 revs, analogue/dials are OK.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff


