Sagaris ride height and door rubbers
Sagaris ride height and door rubbers
Author
Discussion

TheArb

Original Poster:

446 posts

276 months

Saturday 6th March 2010
quotequote all
Hi all,

I did a quick search but I am a bit short of time, and the answers should be easy.

2 questions:

1. What is the best way to raise the ground clearance of the Sagaris, with spacers?
2. Does anyone know where to locate the rubber seals on the rear of the doors, the ones that look like elephant ears, mine have perished. If not, I can arrange to have them made up from a bespoke mould but will probably need to order at least 50,

many thanks in advance

TheArb

Original Poster:

446 posts

276 months

Thursday 11th March 2010
quotequote all
now back in Blighty for a week so would appreciate any help with the above, particularly where I can source the door rubbers,

thanks

shep1001

4,620 posts

218 months

Thursday 11th March 2010
quotequote all
TheArb said:
now back in Blighty for a week so would appreciate any help with the above, particularly where I can source the door rubbers,

thanks
Not sure about the elephant ear description! but if its the hoop seal on the door I believe they are all the same (I have a Tam) you want ETS58 @ £4.68/m 3 meters to do a door from www.sealsplusdirect.co.uk. They have pics on the web site to compare the profiles against. Good company I replaced my seals using them, cheaper than going to a TVR dealer for the same stuff


Shep

L33

3,469 posts

253 months

Thursday 11th March 2010
quotequote all
I don't know about the doors, but going for 19" rims raised my ride height a little. Not really noticable to look at at but it must be higher as it nolonger catches on the ground where it used to - namely getting in ang out of my garage.
thumbup

TheArb

Original Poster:

446 posts

276 months

Friday 12th March 2010
quotequote all
this one:


VARLEYHYD

2,244 posts

236 months

Friday 12th March 2010
quotequote all
TheArb said:
1. What is the best way to raise the ground clearance of the Sagaris, with spacers?
2. Does anyone know where to locate the rubber seals on the rear of the doors,
1. Adjust the standard fitment ride height platforms on each corner

16mm is standard setting from bottom of gold colour threaded collar to aluminium locknut face.

2. Try Andy at TVR Power, he did i look into this for me some time ago, but not sure what the outcome was.

G

shep1001

4,620 posts

218 months

Friday 12th March 2010
quotequote all
TheArb said:
this one:

http://www.racetechdirect.co.uk/tvr-car-parts-subsection.asp?MakeID=3&ModelID=15&CATID=9&SUBCATID=66

Shep

Edited by shep1001 on Friday 12th March 21:34

TheArb

Original Poster:

446 posts

276 months

Friday 2nd April 2010
quotequote all
Shep,

I only just got back to Sydney and saw your posting. Many thanks indeed, I will contact them.