Fuel pump question
Discussion
Hi, just completly drained all my old petrol out.
Problem i got now, is no fuel getting to the engine, i took a hose off and put into petrol can then ignition on and let the fuel pump do the work. Put 3 gallons new petrol in.
Does the system need bleeding of some kind
Cheers, one cold johnny
Problem i got now, is no fuel getting to the engine, i took a hose off and put into petrol can then ignition on and let the fuel pump do the work. Put 3 gallons new petrol in.
Does the system need bleeding of some kind
Cheers, one cold johnny
Judging by your photo you had taken off the fuel return pipe which runs back to the tank, this would explain why you had no fuel comming from that pipe,the metal thingy you refer to is the fuel regulator and this releases exess fuel pressure from the fuel rail to that tube and ultimatly back to the tank. So you drained the tank through the regulator.
Put this pipe back on the regulator and prime the fuel pump my turning the ignition to switch position two a few times you should then have pressure to the fuel rail. You can check this by taking off the plastic cap on the shnieder valve which sits on the fuel rail and depressurising the fuel rail by releasing the valve just as you would let bike tyres down.Make sure you have a rag handy and watch your eyes.
Alternativly just turn her over until she starts
Regards
Neil
Put this pipe back on the regulator and prime the fuel pump my turning the ignition to switch position two a few times you should then have pressure to the fuel rail. You can check this by taking off the plastic cap on the shnieder valve which sits on the fuel rail and depressurising the fuel rail by releasing the valve just as you would let bike tyres down.Make sure you have a rag handy and watch your eyes.
Alternativly just turn her over until she starts
Regards
Neil
Gassing Station | S Series | Top of Page | What's New | My Stuff


