RE: RUF Creates In-House V8
RE: RUF Creates In-House V8
Monday 8th March 2010

RUF Creates In-House V8

Next 911-based RUF - the RGT-8 - due in 2011 with all-new 542bhp V8



RUF, maker of deranged Porsche-based supercars, is to make its own bespoke V8 engine for the next generation of its 911-based RGT model. The new car - called the RGT-8 is set to go on sale in 2011.

The new motor - designed from scratch by RUF - is a flat-crank, dry-sump, 4.5-litre naturally aspirated V8. The new engine develops 542bhp at 8500rpm and 369lb ft at 5400rpm.

RUF is keen to stress that it has focused on making its new mill compact and light (presumably a pre-emptive strike against those who may argue that an eight-cylinder engine is going to be unnecessarily heavy compared with an ordinary 911's flat six). With the V8 weighing in at less than 200kg, you have to conclude that RUF hasn't done a bad job, either...


Although RUF has thrown engine away, the car itself is still based on the Porsche 911, although the styling has been tweaked and an integrated roll cage inserted. The RGT-8 also runs on single-nut centre-lock 19-inch forged alloy wheels wrapped in Michelin Pilot Sport Cup tyres. Ceramic brakes help put a stop to proceedings.

For those who want more extreme styling, RUF will also offer what it calls a 'Frere Package'. This consists of a new front bumper, nose and dashboard components, and has apparently been inspired by the Porsche 550 coupe with which Paul Frere, the Belgian race driver, won best of class at the 1953 Le Mans 24 hours.


Spec fiends can check out the full technical details on RUF's new car (and engine) below:

Body
2 seated coupé with integrated roll-cage
2 racing type bucket seats
Aluminium doors and front hood
Carbon fibre engine cover and rear spoiler

Engine
Lightweight-8-Cylinder-90°-engine with racing DNA
180° crankshaft "Flatcrank"
4,5 Liter displacement
Power output 404 kW (550 bhp) @ 8500rpm
Maximum torque 500 Nm @ 5400rpm
Aluminium crankcase and cylinder heads
Water cooled, cylinderheads and engineblock cross flowed


4-valve system with spherical layout
4 camshafts with hydraulically timed valve system for in- and outlet
Hydraulic valve tappets
Dry sump oil lubrication with two windage trays for each of the 4 chambers
Individual chamber oil suction with 2 suction intakes
Waterpump, generator and AC compressor are directly driven of the Engine (no belts), located at the lowest position
Sequential fuel injection system
Individual cylinder ignition coils
Electronic engine management system
Electronic throttle control system per bank with 2 butterflies
3-Way catalytic converters with stereo closed loop lambda control
On-Board-Diagnosis for continuous monitoring of the exhaust system


Transmission
Rear wheel drive with 6 speed manual gearbox

Chassis:
Electronic stability control system, ABS, traction control,
automatic limited-slip differential

RUF high performance brakes with ceramic discs,
perforated and air cooled
Front brake disc diameter 380 mm
Rear brake disc diameter 350 mm

Forged RUF alloy wheels with single central retaining nut
Front : 9Jx19 with 245/35 ZR 19
Rear : 12Jx19 with 325/30 ZR 19
Michelin Pilot Sport Cup tires

Author
Discussion

Roberty

Original Poster:

1,180 posts

203 months

Monday 8th March 2010
quotequote all
Oh Dear the purists won't like this!

Wonder what it does to the cars CofG, might make more sense in a Cayman or that insane supercar thing they make!

Flat6

593 posts

286 months

Monday 8th March 2010
quotequote all
Narrow body? Looks very sleek. Not sure about the interior though, but sure I could get over it wink

Papa Hotel

12,760 posts

213 months

Monday 8th March 2010
quotequote all
RUF to do a TVR?

(I mean make their own engines and go bust)

Edited by Papa Hotel on Monday 8th March 12:06

Drederick Tatum

1,033 posts

216 months

Monday 8th March 2010
quotequote all
Hmmm a V8 911? Doesnt sound right to me

205jsy

401 posts

205 months

Monday 8th March 2010
quotequote all
Not a big 911 fan but i really do like the look of that. The v8 could work well too.

dinkel

27,861 posts

289 months

Monday 8th March 2010
quotequote all
Question is: would it fit in a Boxter?

And would a Boxter cope with the power. I see this engine in a mid-engined car . . .

Beirut Taxi

6,636 posts

245 months

Monday 8th March 2010
quotequote all
I think it will go down great. It is certainly a big change. I like the idea and I am sure there are lots of buyers who like the change as well.

pits

6,704 posts

221 months

Monday 8th March 2010
quotequote all
dinkel said:
Question is: would it fit in a Boxter?

And would a Boxter cope with the power. I see this engine in a mid-engined car . . .
Yes it probably would fit in somehow, but it would be fairly pointless, you would lose a fair bit of space I would imagine in an already cramped car, and they wouldn't make it for the reason it would have to be cheaper than the top spec, more would buy the Boxster, and it would have to sell for less, and I would also imagine it would need a massive redesign.


I like the "It uses an 911 but its been tweeked style wise" with what? A funny spoiler?

WCZ

11,579 posts

225 months

Monday 8th March 2010
quotequote all
£200,000+ ?

Walton

329 posts

249 months

Monday 8th March 2010
quotequote all

Must say that steering wheel is one of the most horrendous I've ever seen.

Flat6

593 posts

286 months

Monday 8th March 2010
quotequote all
Walton said:
Must say that steering wheel is one of the most horrendous I've ever seen.
Yep, and I once had a 1981 Mini with seats like that

Roberty

Original Poster:

1,180 posts

203 months

Monday 8th March 2010
quotequote all
pits said:
dinkel said:
Question is: would it fit in a Boxter?

And would a Boxter cope with the power. I see this engine in a mid-engined car . . .
Yes it probably would fit in somehow, but it would be fairly pointless, you would lose a fair bit of space I would imagine in an already cramped car, and they wouldn't make it for the reason it would have to be cheaper than the top spec, more would buy the Boxster, and it would have to sell for less, and I would also imagine it would need a massive redesign.
I don't see why they wouldn't fit it in a Boxster/Cayman, this is Ruf not Porsche they don't have to worry about stepping on the shoes of the model above.

As for pricing it less why? I'm sure by the time Ruf have done their thing it won't look like any Boxster or Cayman Porsche will sell you and with 550 V8 horses I'm thinking people will pay what Ruf ask.

turbobungle

576 posts

255 months

Monday 8th March 2010
quotequote all
does anyone know how heavy the flat 6 lump is?

snotrag

15,754 posts

242 months

Monday 8th March 2010
quotequote all
How does it fit!?

I thought the whole point of the flat 6 was that it was... flat? That engine looks far taller - is the sump touchign the ground? and it must be logner too - how does the gearbox fit? I'm intrigued.

Dagnut

3,515 posts

224 months

Monday 8th March 2010
quotequote all
snotrag said:
How does it fit!?

I thought the whole point of the flat 6 was that it was... flat? That engine looks far taller - is the sump touchign the ground? and it must be logner too - how does the gearbox fit? I'm intrigued.
I'd say its probably slung over the axle protruding into the rear of the cabin..if that makes sense

subzero

79 posts

229 months

Monday 8th March 2010
quotequote all


They are quite flat to start with............



They get a bit larger once you've added in induction kit, fuel rails, alternator, etc.

Approx. 150kg for the long block motor on its own (off the top of my head).

It probably fits in the same position as the original motor. Gearbox goes over the rear axle and the transmission tunnel creeps between the rear seats. It is rear engined still.

Robin

Edited by subzero on Monday 8th March 12:38

patmahe

5,924 posts

235 months

Monday 8th March 2010
quotequote all
A higher centre of gravity (assuming the V8 is taller) could seriously affect the handling particularly in a car with the engine at the back, I'd want a seriously lengthy test drive of this to see how it handles before I'd even consider handing over the money.

Also a big V8 isn't really what the 911 is about, not saying its a bad idea, just not sure how much it will appeal to 911/Ruf buyers.

Edited by patmahe on Monday 8th March 12:42

BanjoMaster

26 posts

201 months

Monday 8th March 2010
quotequote all
Ooooh, I bet that's going to sound fantastic! A 911 that sounds like a Judd KV or the E46 M3 GTR? Superb! Wonder if it's a total ground-up design or whether it's based on an LMP1/SUper GT engine or the like? 10k rev limit please!

TheRoadWarrior

1,242 posts

209 months

Monday 8th March 2010
quotequote all
At least it has "Racing DNA"(!) in the engine.. super.



Gary C

15,377 posts

210 months

Monday 8th March 2010
quotequote all
Pity they did not reverse the gearbox and make it mid engined.