RE: Next Corvette To Get European Flavour?
RE: Next Corvette To Get European Flavour?
Tuesday 9th March 2010

Next Corvette To Get European Flavour?

GM design chief admits 'furriners' have presented design studies


Stingray concept with original version
Stingray concept with original version
Reports hot off the web in the US are quoting GM's vice-president of global design on the possible 'Europe-ization' of the next generation 'Vette.

The aforementioned 'des-pres' is Ed Welburn, who has intriguingly revealed to Automotive News that GM's design studios around the world have been invited to submit studies for the C7 Corvette project - which is currently expected to go on sale in the US in 2013.

Apparently the radical (some US pundits might say 'heretical') move has been inspired by the need to improve the iconic Corvette's image in the US, as well as making it more saleable over here.

Is this the way to attract younger buyers?
Is this the way to attract younger buyers?
GM's domestic problem is that the average age of a typical Corvette buyer is a long-in-the-tooth 54, and younger buyers are more likely to be turned-on by European imports than the 'red-neck Ferrari'.

According to the AN article, Welburn says 10 design studies have been submitted from GM global design studios, some of which he described as 'absolutely phenomenal', so we'll be watching with interest to see how the new 'Vette turns out. Most speculation to date has centred on a future model that picks up cues from the split-rear window Corvette Stingray Concept shown here.

Under the skin, the expectation is that the C7 production model will need to take substantial steps forward too, with a dual-clutch transmission and a smaller, but more efficient V8 under the hood. The next version could also be slightly more compact, and the reports also say that Welburn's team will be focusing on interior quality - not the current model's strongest suit.

(Above) Ed Welburn walks viewers around the Corvette Stingray Concept - recorded last year.

Author
Discussion

T89 Callan

Original Poster:

8,422 posts

224 months

Tuesday 9th March 2010
quotequote all
If those concepts are anything to go by then it will be a stunning car.

kambites

71,748 posts

252 months

Tuesday 9th March 2010
quotequote all
Will they put the steering wheel on the right side? Until they do, I'm not interested. frown

Edited by kambites on Tuesday 9th March 12:41

soad

34,769 posts

207 months

Tuesday 9th March 2010
quotequote all
Recall this being mentioned last year and seeing those sketches/photos.

Nice looking motor that. cool

Papa Hotel

12,760 posts

213 months

Tuesday 9th March 2010
quotequote all
I hope they don't take the 'Europe-ization' [sic] too far, for me a big part of the charm of the Corvette is its simplicity and American look.

havoc

33,538 posts

266 months

Tuesday 9th March 2010
quotequote all
The "Europe-ization" is going to include the price, you do all realise that!?!

Otherwise I like the ideas...and IMHO the 'vette is one manual car that is crying out for a new gearbox

Galsia

2,266 posts

221 months

Tuesday 9th March 2010
quotequote all
All they have to do is put an effort into designing something different and not putting out the same model every year since 1989.

mattmoxon

5,026 posts

249 months

Tuesday 9th March 2010
quotequote all
Nice looking machine that. The problem with brining it here has a RHD UK spec car will bump the price up - allot. In fact it would be cheaper to import a LHD one from the states (what I would do) I have been driving a LHD Mustang for nine months now and I have never wished it was a RHD car, LHD really is no issue at all.

Matt

hardmouse1

61 posts

204 months

Tuesday 9th March 2010
quotequote all
Well i think the looks are pretty good,scratchchin however will it corner like a bag of spanners???? well 'most' american cars do...... cos they dont do corners tongue out

pits

6,704 posts

221 months

Tuesday 9th March 2010
quotequote all
PH said:
The "Europe-ization"
Whilst it maybe a quote and a fictional word, could you at least get rid of the
"z" (zed) ie Europe-isation" I hate the American use of zed, and overused letter.

Fartgalen

6,940 posts

238 months

Tuesday 9th March 2010
quotequote all
[dumb and dumber] I like it. I like it a lot ! [/dumb and dumber]

ShadownINja

80,190 posts

313 months

Tuesday 9th March 2010
quotequote all
kambites said:
Will they put the steering wheel on the right side? Until they do, I'm not interested. frown
Ditto.

oagent

2,295 posts

274 months

Tuesday 9th March 2010
quotequote all
Simples! de-chrome the wheels, send it to Zagato for an alloy body, then put a nice, simple well made interior in.


Quattronaut

88 posts

215 months

Tuesday 9th March 2010
quotequote all
pits said:
PH said:
The "Europe-ization"
Whilst it maybe a quote and a fictional word, could you at least get rid of the
"z" (zed) ie Europe-isation" I hate the American use of zed, and overused letter.
Thou weson zed, thou unnecessary letter

Gridl0k

1,058 posts

214 months

Tuesday 9th March 2010
quotequote all
^^^^ Leslie Ash meets Aston Martin...

ukzz4iroc

3,506 posts

205 months

Tuesday 9th March 2010
quotequote all
oagent said:
Simples! de-chrome the wheels, send it to Zagato for an alloy body, then put a nice, simple well made interior in.

Please don't use the 'simples' thing. Really is sad.

thirsty

726 posts

295 months

Tuesday 9th March 2010
quotequote all
clapclap

I hope they don't get too far from what makes the Vette a good buy. Do something great with the styling, and it will be a winner.

ZOLLAR

19,920 posts

204 months

Tuesday 9th March 2010
quotequote all
Papa Hotel]I hope they don't take the 'Europe-ization' [sic said:
too far, for me a big part of the charm of the Corvette is its simplicity and American look.
yes +1 its nice to have something different rather than all the same!

adycav

7,615 posts

248 months

Tuesday 9th March 2010
quotequote all
Coming soon to a '300bhp/ton reply in a what car thread' near you!

k-ink

9,070 posts

210 months

Tuesday 9th March 2010
quotequote all
Looks like an uncomfortable pile of lumpy parts to me. More like a bulky transformer than a sleek smooth Stingray!

LuS1fer

43,572 posts

276 months

Tuesday 9th March 2010
quotequote all
Galsia said:
All they have to do is put an effort into designing something different and not putting out the same model every year since 1989.
1989 was the middle of the C4 model (launched in 1984 and demised in 1997) and simply underlines your ignorance of the significant advances made with the 1998 C5. had you said 1998, you'd still be wrong but might be considered to know something about the subject matter. wink

Whatever the Corvette "should be" or "needs to be", the fact is the sales have plummetted and it needs something smaller and more dramatic than the current C6. It may end up with a broader range with a V6 but at least it should survive.

Of course, if it does get to RHD, I won't be buying one.