door keeps opening on the move!
door keeps opening on the move!
Author
Discussion

funbobby

Original Poster:

1,705 posts

287 months

Sunday 14th March 2010
quotequote all
took my tam out today and suddenly door keeps trying to open but if i press button on dash or under wing mirror nothing happens, any ideas??

shep1001

4,620 posts

218 months

Sunday 14th March 2010
quotequote all
funbobby said:
took my tam out today and suddenly door keeps trying to open but if i press button on dash or under wing mirror nothing happens, any ideas??
Check the emergency release handle(s) is in the correct position (remember the drivers side has two). If its not and the lock is partially engaged the door may appear closed but it can sprig open on the move.

If the problem is electrical ie you can hear the solenoid actuating not sure where you would look but I would start with the door modules in the footwells

Shep

L33

3,469 posts

253 months

Sunday 14th March 2010
quotequote all
shep1001 said:
Check the emergency release handle(s) is in the correct position (remember the drivers side has two).
Shep
2??? Had look at mine and I only appear to have the 1 on the Sag...

Barry Ashcroft

1,958 posts

250 months

Sunday 14th March 2010
quotequote all
Mine did this once it was the button on the dash sticking in.

tail slide

2,169 posts

276 months

Sunday 14th March 2010
quotequote all
Mine did this when new - rather alarming. But never repeated after I reset the door ecu. Yours may have had some water or condensation in it perhaps which was prob with mine.

Easy fix - the ECU's on the left hand side of the passenger footwell. Just disconnect it for at least 30secs, then reconnect. This resets it, and it remembers its function in life..... smile

funbobby

Original Poster:

1,705 posts

287 months

Sunday 14th March 2010
quotequote all
had a quick look down there earlier but will have a better look in the light tommorow but what does the ecu look like? all seemed dry down there to be honest. had the door cards off and checked in there but all seems as it should.

shep1001

4,620 posts

218 months

Sunday 14th March 2010
quotequote all
L33 said:
shep1001 said:
Check the emergency release handle(s) is in the correct position (remember the drivers side has two).
Shep
2??? Had look at mine and I only appear to have the 1 on the Sag...
YHM. Not all car have it (or I don't think they do....) Read the email and have a look

Shep

L33

3,469 posts

253 months

Monday 15th March 2010
quotequote all
shep1001 said:
L33 said:
shep1001 said:
Check the emergency release handle(s) is in the correct position (remember the drivers side has two).
Shep
2??? Had look at mine and I only appear to have the 1 on the Sag...
YHM. Not all car have it (or I don't think they do....) Read the email and have a look

Shep
Cheers.
Lee
thumbup

funbobby

Original Poster:

1,705 posts

287 months

Monday 15th March 2010
quotequote all
unplugged the ecu and it sorted it out but still not 100% sometimes it stops when i press the button and doing the window triggers the solenoid, thinking bad connection behind the 3 buttons but how do you get to it?

TVRWazzock

1,653 posts

252 months

Monday 15th March 2010
quotequote all
funbobby said:
took my tam out today and suddenly door keeps trying to open but if i press button on dash or under wing mirror nothing happens, any ideas??
DOOR ECU situated in the drivers bay near clutch fluid container. Happened to me, drivers door kept opening when moving. The drivers door ECU had to be reconditioned.

funbobby

Original Poster:

1,705 posts

287 months

Monday 15th March 2010
quotequote all
so have disconnected one on drivers side thought passenger side did both as some improvement when i did it earlier?? but seems fine at the mo fingers crossed, how much are they to repair?

steven76630

40 posts

255 months

Monday 15th March 2010
quotequote all
I had this problem a while back it was a sticky button on the dash as stated by Barry very disconcerting when it happens just as you are coming to a stop the door pops open, easy fix with WD40.

JonRB

80,038 posts

301 months

Monday 15th March 2010
quotequote all
The boot on my Sagaris was doing this for a while when it got damp but seems to be ok now.

If it is solenoid-based then try using the "lock yourself in" button to disable them.

funbobby

Original Poster:

1,705 posts

287 months

Saturday 10th April 2010
quotequote all
well this problem has reared its ugly head again, have swapped ecu's but still not right, if i press door release on my side or under mirror nothing happens but will pop open if trying to drive it so am stumped again. im wondering if it thinks its immobilised and is it worth unplugging the alarm in passenger footwell? why oh why on a sunny day does it give me grief!!

funbobby

Original Poster:

1,705 posts

287 months

Sunday 11th April 2010
quotequote all
anyone help? starting to get hacked off with the electrical gremlins i keep getting since i got the car! do i need to diconnect battery/fuse if i reset the alarm ecu's?

Tamster.

534 posts

239 months

Sunday 11th April 2010
quotequote all
funbobby said:
anyone help? starting to get hacked off with the electrical gremlins i keep getting since i got the car! do i need to diconnect battery/fuse if i reset the alarm ecu's?
Funbobby, i remember the passenger side door/window ecu doing this, i took the ecu out, removed the screws at top and pulled out the circuit board which had water ingress across the pcb tracks, gave it a clean with switch cleaner left it to fully dry out in the airing cupboard overnight and refitted the next day, all was ok afterwards, have the gremlin's moved across to the driver's door?

Whereabouts's in Hert's are you? you are welcome to pop it to my place, i will take a look for you.

Also the windscreen was poorly fitted from new which allowed water to get into the ecu module,this was replaced with a new screen and correctly fitted. thumbup

funbobby

Original Poster:

1,705 posts

287 months

Sunday 11th April 2010
quotequote all
thanks tamster im based in hemel, thing is i switched ecu's over and still drivers side does it so pretty sure its not that? last time i had this unplugging it seemed to resolve it but buttons are dead this time and pops open when it feels like normally as sonn as i turn the ignition on. not sure if an earth fault, i had to unplug dash ecu the other day and maybe somethings been knocked but have had a good look and there is nothing obvious i can see.

Tamster.

534 posts

239 months

Sunday 11th April 2010
quotequote all
funbobby said:
thanks tamster im based in hemel, thing is i switched ecu's over and still drivers side does it so pretty sure its not that? last time i had this unplugging it seemed to resolve it but buttons are dead this time and pops open when it feels like normally as sonn as i turn the ignition on. not sure if an earth fault, i had to unplug dash ecu the other day and maybe somethings been knocked but have had a good look and there is nothing obvious i can see.
Funbobby, sound's like the button that open's the driver's door has become jammed on and is confusing the Ecu, open circuit the button by chopping one wire to it and see if normal service is resumed, will be a minor niggle for sure, life would be so boring if everything worked properly!

Apart from that is everything else working ok?

Give us a shout if you need any help, am just up the road in Hitchin yes

funbobby

Original Poster:

1,705 posts

287 months

Sunday 11th April 2010
quotequote all
having looked again today when the ignition is on pressing the window buttons triggers the solenoind but not the button itself also moving the gear stick sometimes triggers the solenoid so thinking poor connection somewhere? does stereo have to come out to get to that side of switches? dash faults have come back intermittently again which is very frustrating. have a mate who works in hitchin high st so maybe will pop over sometime, thanks again.

Barry Ashcroft

1,958 posts

250 months

Sunday 11th April 2010
quotequote all
Stereo and stereo surround has to come out but it's very to do. The surround is held in by 2 small 8mm nuts visable when stereo is removed.