Relay/fuse for light circuit
Relay/fuse for light circuit
Author
Discussion

Murph7355

Original Poster:

41,969 posts

285 months

Sunday 14th March 2010
quotequote all
Can anyone point me at which relay/fuse(s) manage the lights?

I think one or the other has blown and could do with knowing which one to point my fingers at.

Cheers
Andy

PS ray_von - don't say a word about electrics!

Murph7355

Original Poster:

41,969 posts

285 months

Sunday 14th March 2010
quotequote all
Fuse 11 had blown. A 15A one. Did the trick.

Barreti

6,689 posts

266 months

Sunday 14th March 2010
quotequote all
Here's a tip I was told ages ago Andy.

Photocopy your fuseboard layout, laminate it and put it under the passenger footwell mat.

Murph7355

Original Poster:

41,969 posts

285 months

Sunday 14th March 2010
quotequote all
Barreti said:
Here's a tip I was told ages ago Andy.

Photocopy your fuseboard layout, laminate it and put it under the passenger footwell mat.
It is one I shall be following at the weekend!

I may also invest in some of the new fuses that show you when they've blown. Much easier in the dark smile

5.0ltr

2,834 posts

228 months

Monday 15th March 2010
quotequote all
Barreti said:
....Photocopy your fuseboard layout....
Ian, how do you get the fuse box in a photocopier, please?
Or you could wait until Growl when Bruce 2Munkeys will have the answer to this for a small contribution.
(Ian, no email yet re: your roof photos)

Murph7355

Original Poster:

41,969 posts

285 months

Tuesday 16th March 2010
quotequote all
Barreti said:
Here's a tip I was told ages ago Andy.

Photocopy your fuseboard layout, laminate it and put it under the passenger footwell mat.
If anyone doesn't have it, I scanned my manual for the fuse numbering page (link below). At the weekend I might translate this into the actual layout smile

Fuse numbering here

A laminated copy will be stuck under my mats.

I guess everyone would need to check that the order of their fuses/relays hasn't been changed.

ray_von

3,038 posts

281 months

Wednesday 17th March 2010
quotequote all
Yours isn't really like that though Andy is it thumbup

Murph7355

Original Poster:

41,969 posts

285 months

Wednesday 17th March 2010
quotequote all
ray_von said:
Yours isn't really like that though Andy is it thumbup
I have a special version for mine that has a few changes/extras! Thought this might work for standard cars though.

Btw, the footwell area being so tidy was a godsend when fiddling with fuses smile

spend

12,581 posts

280 months

Wednesday 17th March 2010
quotequote all
IIRC Mike used details I provided of the internal fusebox layout to make some modifications wink

Just put it in a spreadsheet & make your own notes on the flip side, much better than the handbook anyway wink
You can find OpenOffice & MiSofty versions at:
http://tvr3.dspen.co.uk/fusebox/myfusebox.xhtml
http://tvr3.dspen.co.uk/fusebox/myfusebox.ods
http://tvr3.dspen.co.uk/fusebox/myfusebox.xls

to use as templates for your very own hehe

Bodmin

596 posts

227 months

Wednesday 17th March 2010
quotequote all
Murph7355 said:
Barreti said:
Here's a tip I was told ages ago Andy.

Photocopy your fuseboard layout, laminate it and put it under the passenger footwell mat.
If anyone doesn't have it, I scanned my manual for the fuse numbering page (link below). At the weekend I might translate this into the actual layout smile

Fuse numbering here

A laminated copy will be stuck under my mats.

I guess everyone would need to check that the order of their fuses/relays hasn't been changed.
There definatley seems to be some variance between what the handbook layout says & the actual fuseboard.

I discovered this when my 95 Griff lost fuel pump supply, which I eventually traced to a short in the wiring connector in the N/S seat belt area.

My handbook does not indicate a fuse for the fuel pump which I thought was a bit odd but then again it is a TVR wobble. Eventually I discovered that fuse 15 is in fact for the pump supply but the handbook describes it as 'spare' smash

In note on Spend's version fuse 15 is denoted as 'driving lamps' whereas on Murph7355 is does denote it as the fuel pump.......ahh the joys of TVR ownership silly

Bodders

spend

12,581 posts

280 months

Wednesday 17th March 2010
quotequote all
Don't take mine as an example, my fusebox is heavily modified from any standard version. It was purely an example template to fill in and should in no way be taken as working for your cars hehe

Murph7355

Original Poster:

41,969 posts

285 months

Wednesday 17th March 2010
quotequote all
[quote=spend]IIRC Mike used details I provided of the internal fusebox layout to make some modifications wink
.../quote]
Fans and ecu are controlled differently and a couple of chunkier fuses inserted in the standard slots (I assume to act as a bypass).

Those entries are modified in my handbook, but rather than confuse I edited it back to "standard".

With cars of this age I'm sure many will have been tweaked.

2Munkys

1,228 posts

266 months

Thursday 18th March 2010
quotequote all
I knocked up a load of these; they're in Vinyled A5 and have velcro pads on the rear for sticking to the inside of the carpeted battery panel. Handy? Yea, I reckon so. I banged out a few of those that differ in layout. I was gonna bring 'em along to the Growl and let them go for £1 a pop toward the charity.


Murph7355

Original Poster:

41,969 posts

285 months

Thursday 18th March 2010
quotequote all
Fq me - remind me never to play you at Top Trumps biggrin

Looks very good.