Standard engine with the lowest state of tune highest tuning
Discussion
What engines/cars are there, in such a bad state of tune in standard configuration that just cheap bolt on upgrades can give massive hikes in power.
i.e. 4 cyln, 6 cyln and V8
I would image the MX-5 engine would be up there somewhere, i.e. a 4kish conversion, even on an old engine can give you 120+% increase in bhp
Any others?
i.e. 4 cyln, 6 cyln and V8
I would image the MX-5 engine would be up there somewhere, i.e. a 4kish conversion, even on an old engine can give you 120+% increase in bhp
Any others?
MarJay said:
Has to be something like the MG ZT 260 with a 4.2 litre V8 that only produces 260bhp. Has the potential for a LOT more power.
specific output of 62bhp/litre. Not quite as bad as the Vectra SRI I quoted, but nearly there! 
Obviously we'd be looking at modern cars; classics often had huge engines with very little power.
I don't consider bolting forced-induction onto a N/A engine to be 'tuning' in the conventional sense. In the spirit of things, wouldn't it be more appropriate to consider how much more power could be extracted from an MX5 engine, for example, while keeping it N/A? That's what 'state of tune' means to me.
Agree with the American V8 comments; they reached a nadir in the 70s after the oil crisis, where 5.7 litre V8 Corvettes putting out less than 200 bhp.
At the other end of the scale, on production cars, some of Honda's VTEC stuff, the S2000 for example, are up at 120 bhp/litre for a mass-produced N/A engine. Not much to improve on there without spending loads of wonga.
Agree with the American V8 comments; they reached a nadir in the 70s after the oil crisis, where 5.7 litre V8 Corvettes putting out less than 200 bhp.
At the other end of the scale, on production cars, some of Honda's VTEC stuff, the S2000 for example, are up at 120 bhp/litre for a mass-produced N/A engine. Not much to improve on there without spending loads of wonga.
Edited by speedtwelve on Monday 15th March 15:13
RobM77 said:
MarJay said:
Has to be something like the MG ZT 260 with a 4.2 litre V8 that only produces 260bhp. Has the potential for a LOT more power.
specific output of 62bhp/litre. Not quite as bad as the Vectra SRI I quoted, but nearly there! 
Obviously we'd be looking at modern cars; classics often had huge engines with very little power.
the 2.5V6 Vectra was 170bhp.Arese said:
RobM77 said:
MarJay said:
Has to be something like the MG ZT 260 with a 4.2 litre V8 that only produces 260bhp. Has the potential for a LOT more power.
specific output of 62bhp/litre. Not quite as bad as the Vectra SRI I quoted, but nearly there! 
Obviously we'd be looking at modern cars; classics often had huge engines with very little power.
the 2.5V6 Vectra was 170bhp.
http://www.parkers.co.uk/cars/specs/Detail.aspx?de...
134bhp from 2498cc. That's 53 bhp/litre. I think we have a winner
33mpg and 202g/km CO2 is pretty special as well for a car that does 0-60 slower than a 1.6 Micra 
Edited by RobM77 on Monday 15th March 15:20
Cosworth YB... 200bhp ish from factory. The standard engine is VERY strong.... 600bhp+ easily on standard block and standard crank and conrods. Even standard pistons are strong enough. Some people like to machine themdown to lower comp ratio slightly though.
Lexus V8's are very strong... Toyota 2JZ engine again super strong
Lexus V8's are very strong... Toyota 2JZ engine again super strong
xyphod said:
What engines/cars are there, in such a bad state of tune in standard configuration that just cheap bolt on upgrades can give massive hikes in power.
i.e. 4 cyln, 6 cyln and V8
I would image the MX-5 engine would be up there somewhere, i.e. a 4kish conversion, even on an old engine can give you 120+% increase in bhp
Any others?
depends what you mean by "bad" state of tune. And what you consider a "bolt on" mod. Essentially nearly all the parts in an engine use bolts of some description.i.e. 4 cyln, 6 cyln and V8
I would image the MX-5 engine would be up there somewhere, i.e. a 4kish conversion, even on an old engine can give you 120+% increase in bhp
Any others?
And what sort of gains and money are you looking at?
I mean a C6 z06 7.0 litre Corvette only makes 72bhp/litre. But anyone who tries to claim a 505hp, small, compact, lightweight engine that meets US emissions standards and can still return over 26mpg (US gallons) as a "bad" state of tune is really off their rocker.
In short, it's likely to be some form of V8. A Lexus LS400 4.0 litre DOHC V8 can support around 450-500hp with some turbo's "bolted" to it, up from it's stock 270hp.
However I suspect a hard act to follow would be the 2003/4 Mustang Cobra. It uses a cast iron block DOHC 4.6 litre Ford modular V8 with an Eaton M112R Roots style blower, making a claimed 390hp/390lb ft in standard trim.
However there's a company that'll fit an additional brace of turbo's to offer up some compound boost.
With an otherwise totally stock engine it was making over 1100rwhp!
Dooshbag said:
Winner = VAG's 1.8 20v engine, from 125 to 240 bhp from the factory with oodles more for not much.
ETA - OK, he spent £14k, but how does 500+ bhp from 1.8 sound ? > http://www.tyresmoke.net/forum/general-cars/125049...
Agree, I got 220 Bhp with a stage one remap and some small extras, not bad from a standard 150 bhp.ETA - OK, he spent £14k, but how does 500+ bhp from 1.8 sound ? > http://www.tyresmoke.net/forum/general-cars/125049...
Edited by Dooshbag on Monday 15th March 15:26
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff




