BMW Fault Codes
Author
Discussion

junglie

Original Poster:

2,052 posts

248 months

Monday 15th March 2010
quotequote all
Evening all,

I have the pleasure of owning a 2003 BMW Z4 3.0i SE manual with 43k on the clock.

All is well apart from a missfire / hesitation below 2000 rpm when accelerating in a high gear (3rd / 4th). It does not always happen and everything is perfectly normal above 2000 rpm. Fuel economy is fine and there are no abnormal noises / smells.

I asked my local garage to run their diagnostics and it came up with '10141 - fault not recognised' or something similar. I thought it may be a crankshaft position sensor, MAF or coil pack but I would have expected those to have registered.

Has anybody heard of these symptoms or know what the code means?

Thanks

bullitinhead

299 posts

200 months

Monday 15th March 2010
quotequote all
while google fails to show up any fault codes for 10141... it does xreferance a P0141
which is an o2 sensor heating fault, which could cause rough running on an closed loop efi system

were the codes read at a BM dealers?

junglie

Original Poster:

2,052 posts

248 months

Monday 15th March 2010
quotequote all
No - at a large independent (not BMW specific).

I am going to book it into a BMW Stealer although I assume I will have to pay a diagnostic charge. Failing that it will be a case of changing over parts to see if it rectifies the fault which is slightly hit and miss.

patchst

185 posts

231 months

Tuesday 16th March 2010
quotequote all
I'm not able to help with the code but you can get a OBD2 Code reader from Amazon for around £25 which may be cheaper than going to the dealers.

Edited by patchst on Tuesday 16th March 08:33