K&N the oppsite of Ronseal
K&N the oppsite of Ronseal
Author
Discussion

EP3KID

Original Poster:

11 posts

200 months

Tuesday 16th March 2010
quotequote all
I recently bought a K&N induction kit for my car and it was rubbish it was the exact oppsite of ronseal it done nothing it said on the tin
The car became unresponsive
Very poor fuel economy
The induction roar was good the major problem was the fact that when the car idling and under 3k revs it sounded like a road sweeper no joke here is my attached video.
http://www.youtube.com/watch?v=YyhfuNsC7s4
I went to K&N with this problem and they didnt care and said it was only my car so i got videos of other civic type r's with the same kit and videos to prove they still didnt care is this a company you really want to deal with?

hyperblue

2,916 posts

211 months

Tuesday 16th March 2010
quotequote all
Kinda your fault for buying one designed to suck in hot air in though isn't it?

Buy one that's shielded from the engine heat and you might get some performance gains.

Edited by hyperblue on Tuesday 16th March 22:37

Urban Sports

11,321 posts

234 months

Tuesday 16th March 2010
quotequote all
I had a K&N on my S2000, it was awesome.

ETA: Mine was the full CAI, absolutely amazing noise.

thumbup

Edited by Urban Sports on Tuesday 16th March 22:37

EDLT

15,421 posts

237 months

Tuesday 16th March 2010
quotequote all
Its pulling in hot air from the back of the engine, what did you expect?

gj88

1,961 posts

225 months

Tuesday 16th March 2010
quotequote all
I'd imagine it would be pretty hard to paint a fence with an air filter. Its a bit too solid tbh. You cant blame K&N for that.












wink

Marf

22,907 posts

272 months

Tuesday 16th March 2010
quotequote all
You should rename your video "How not to fit a K&N".

Engines don't take too kindly to sucking in hot air, this is particularly true of Honda's B and K series engines.

You need a proper cold air induction kit. Not a mahoosive cone just sitting exposed in the middle of the engine bay.

Ian974

3,210 posts

230 months

Tuesday 16th March 2010
quotequote all
Sounds a little odd, not sure why it would be though. Looks like it's on ok anyway. the little breather hoses connected up too?
The typhoon kit I had on mine for a while (which, granted, also sucked in hot air) sounded excellent!

ScottishSamurai

8,176 posts

207 months

Tuesday 16th March 2010
quotequote all
Ian974 said:
Sounds a little odd, not sure why it would be though. Looks like it's on ok anyway. the little breather hoses connected up too?
The typhoon kit I had on mine for a while (which, granted, also sucked in hot air) sounded excellent!
Surpised to see you on this subject Ian hehe

Marquis_Rex

7,377 posts

270 months

Tuesday 16th March 2010
quotequote all
Look on the bright side- if you convert your car to carbs, then the hot air induction will be good for fuel atomisation when ambient air temps are cold and the engine is cold wink

silverMX

1,277 posts

218 months

Tuesday 16th March 2010
quotequote all
K&N for the win I say!

I've got the Typhoon on my MX5 and it DOES do exactly what it says on the tin; awesome sound and I think (although it could be the heavier right boot due to the previous point!) better responsiveness and better acceleration!

JQ

6,890 posts

210 months

Tuesday 16th March 2010
quotequote all
silverMX said:
K&N for the win I say!

I've got the Typhoon on my MX5 and it DOES do exactly what it says on the tin; awesome sound and I think (although it could be the heavier right boot due to the previous point!) better responsiveness and better acceleration!
Me too. Not sure about any extra power but the throttle is definately more responsive and it does sound fantastic.

skyslimit

524 posts

203 months

Tuesday 16th March 2010
quotequote all
Not a fan of K+N really. 3 different cars I've had them on have all lost torque wth them. Worst was a Renault 5 GT Turbo many, many years ago.

There are better solutions out there IMHO.

KierenGG

1,749 posts

205 months

Tuesday 16th March 2010
quotequote all
More importantly than the OP's point, should I buy them for the MGB? scratchchin

rockandrollmark

1,181 posts

254 months

Wednesday 17th March 2010
quotequote all
KierenGG said:
More importantly than the OP's point, should I buy them for the MGB? scratchchin
Had a K&N cone filter on the A series in my Mini. Made a great noise and the improvement in throttle response was noticeable

Martin_Hx

4,029 posts

229 months

Wednesday 17th March 2010
quotequote all
silverMX said:
K&N for the win I say!

I've got the Typhoon on my MX5 and it DOES do exactly what it says on the tin; awesome sound and I think (although it could be the heavier right boot due to the previous point!) better responsiveness and better acceleration!
I have one on the same car as the OP, terrible stationary but i have a shield + CAI and once moving bounce

Sounds alright too smile

Dr.Doofenshmirtz

16,952 posts

231 months

Wednesday 17th March 2010
quotequote all
Hmm, I know idea
I'm going to replace my perfectly adequate standard air filter, which will have a cold air feed as standard, with an air filter which filters less (so my engine will suck in all that lovely micro grit into the engine) and as an added bonus lowers performance cos the air is warmer thus less dense (unlike the driver).


  • Certain high performance engines excepted.

LuS1fer

43,568 posts

276 months

Wednesday 17th March 2010
quotequote all
Some filters suck too much air which puts the volume outside the scope of the fuel tables so the car runs lean blah blah. These induction kits need a re-tune or more fuel. There's no such thing as a free ride.

skyslimit

524 posts

203 months

Wednesday 17th March 2010
quotequote all
Doofenshmirtz and Lucifer, I agree 100% yes

Some rare common sense in a max power BS world.

EP3KID

Original Poster:

11 posts

200 months

Thursday 18th March 2010
quotequote all
Dr.Doofenshmirtz said:
Hmm, I know idea
I'm going to replace my perfectly adequate standard air filter, which will have a cold air feed as standard, with an air filter which filters less (so my engine will suck in all that lovely micro grit into the engine) and as an added bonus lowers performance cos the air is warmer thus less dense (unlike the driver).


  • Certain high performance engines excepted.
Haha Clearly dense thats why i can afford to go and buy a 2005 Civic Type R premier edition with 25k on the clock a 19 years old mate

10 Pence Short

32,880 posts

248 months

Thursday 18th March 2010
quotequote all
EP3KID said:
Dr.Doofenshmirtz said:
Hmm, I know idea
I'm going to replace my perfectly adequate standard air filter, which will have a cold air feed as standard, with an air filter which filters less (so my engine will suck in all that lovely micro grit into the engine) and as an added bonus lowers performance cos the air is warmer thus less dense (unlike the driver).


  • Certain high performance engines excepted.
Haha Clearly dense thats why i can afford to go and buy a 2005 Civic Type R premier edition with 25k on the clock a 19 years old mate
Well, a fool and his money are easily parted.

For that engine in that bay you want an enclosed system drawing cool air from outside the engine bay. If you were bright enough to realise cash doesn't equal experience you might have known that...