ford focus 2003, 1.8 TDCI
Discussion
bought the car 2 months ago, nothing wrong
when i start it up, sometimes it takes holding the key for 5 seconds to get it started (when left overnight) and sometimes it starts straight away
as it goes from 0rpm to its idling rpm, which takes quarter of a second or something, it makes a loud shunt sort of noise and the engine rocks a bit, but its a split second thing, it never used to do it when i got it so its something faulty
when i floor it, sometimes it pulls strong and other times it doesent pull as strong, the power delivery is very uneven compared to how it was when i first bought it, i put my foot down and you can feel it hesitate sometimes
there is no clouds of smoke or anything
one garage has told me the dual mass flywheel, after starting my car up 30 times in a row and shutting it off, and the other garage said if it was that i would feel it through the clutch and i cant feel anything at all its smooth
when i start it up, sometimes it takes holding the key for 5 seconds to get it started (when left overnight) and sometimes it starts straight away
as it goes from 0rpm to its idling rpm, which takes quarter of a second or something, it makes a loud shunt sort of noise and the engine rocks a bit, but its a split second thing, it never used to do it when i got it so its something faulty
when i floor it, sometimes it pulls strong and other times it doesent pull as strong, the power delivery is very uneven compared to how it was when i first bought it, i put my foot down and you can feel it hesitate sometimes
there is no clouds of smoke or anything
one garage has told me the dual mass flywheel, after starting my car up 30 times in a row and shutting it off, and the other garage said if it was that i would feel it through the clutch and i cant feel anything at all its smooth
Sounds a lot like the dual mass flywheel problem which affects these cars. Some help here
How do i know my DMF is going on my ford focus 1.8tdci?
I thought I had the same trouble on mine. The starter motor burnt out (1.8 TDCI is a terrible cold starter) and needed replacing. I found a few steel shavings and worried that it might be a DMF. It's been 2 years and all fine still...
How do i know my DMF is going on my ford focus 1.8tdci?
I thought I had the same trouble on mine. The starter motor burnt out (1.8 TDCI is a terrible cold starter) and needed replacing. I found a few steel shavings and worried that it might be a DMF. It's been 2 years and all fine still...
jamie128 said:
when i floor it, sometimes it pulls strong and other times it doesent pull as strong, the power delivery is very uneven compared to how it was when i first bought it, i put my foot down and you can feel it hesitate sometimes
Are you sure that this isn't clutch slip?My wife's two year old 2.0 TDCi Focus started slipping its clutch at 17,000 miles.
The DMF had failed.
It is definitely a common problem and they cost several hundred quid to replace.
Good luck.

not sure
i just know that the garage who said it was the DMF was part of the good garage scheme, and after starting my car 30 times over said it was that
but i get no vibration through the clutch, changing gears isent hard and the only time theres a noise is as the engines engages sort of thing
i just know that the garage who said it was the DMF was part of the good garage scheme, and after starting my car 30 times over said it was that
but i get no vibration through the clutch, changing gears isent hard and the only time theres a noise is as the engines engages sort of thing
do mechanics charge for getting it out? i cant afford that plus to fix it if it is knackered, is there no other way to check? he started the car 30 odd times while he was underneath someone else started it, and he managed to diagnose a DMF failure from that, is that possible? or has he hazoured a guess?
jamie128 said:
would the starter motor make a loud rattle or anything on startup if it was faulty?
Not necessarily.When the DMF failed on my wife's Focus, the car still engaged gears properly, the clutch operated smoothly and there were no knocks or rattles.
There was just a touch of clutch slip, which would have got worse as the DMF progressively fell apart. I'm sure that there would have been more severe symptoms if I had left it longer before getting it fixed.
Even it is only the DMF that has gone west, it would be daft not to change the clutch and the slave cylinder whilst the gearbox is in bits.
To give you some idea of cost, a genuine Ford DMF is over £400 for the part itself and Ford quote over five hours work at £70ph to fit it.
But you really don't want to replace your DMF with another crap Ford one.
My tame mechanic charged £465 for a DMF, clutch and concentric slave cylinder, with labour another £150 on top. The whole job cost £720 including the VAT.
To put that little lot into context, the same mechanic charged me less than £300 to change the cam belts and tensioners on a Ferrari 328.
The moral of this story is not to buy a Ford TDCi with a manual box, or any other crap diesel with a DMF. They frequently fall apart and they are expensive to fix.

jamie128 said:
do mechanics charge for getting it out?
Yes, of course they do.But a decent independent mechanic will not be charging you the earth for labour. The expensive bit is the dual mass flywheel itself, should it be knackered.
As Zad says, the only way to be sure it to bite the bullet and get someone to take the gearbox off.
You might be lucky and it could be something other than the DMF, but regrettably they are prone to failure.
The rest of the powertrain seems pretty reliable, so unfortunately the DMF is a likely cause of your problems.
But none of us is going to be able to diagnose it from our keyboards, so you will have to get it booked in.
Good luck.
jamie128 said:
did she have any symptoms of the car hesitating etc or not? my car seems to have lost power
No, not at all.Our problems were nothing more than a bit of clutch slip. I didn't suspect the DMF at all, until I saw the state of it after it was removed.
If your car is hesitating and losing power then your problem might be something completely different.
I asked the question whether your loss of power might actually be clutch slip, which was the principle symptom that we had.
Anyway, must dash.
Let us know how you get on with it and I hope that it turns out to be just a clogged up diesel filter or something similarly cheap.

Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff



