NEW Alternator pully needed

[RemaL]

Long story short, sorted the battery, Alternator for my Tiger but after some reading finding out my alternator could have died due to over revving/heating due tot he fact it's for a Sierra and not a more revving Zetec.

So I need a larger Alternator Pully. I have a 54mm diameter, Shaft Diameter: 15mm but need a 68mm+ Diameter pully with 5-6 grooves. I can play about with the belt later as I will need a bigger size

So anyone recommened a company that sell them?

Raceline don't do them even though they are on their website

I called Brise but this is the only company I have yet found with anything like what I need

cheers

[r1ot]

any reason why you couldn't just fit the alternator from a Zetec?

[RemaL]

r1ot said:

any reason why you couldn't just fit the alternator from a Zetec?

1 I don't have one
2 I don't think it will fit my raceline mounting kit.
3 Is the alternator pully from a zetec 68mm plus? and provides twice the needed AMPS needed

and last i'm not sure but now looking into it

[RemaL]

NO ONE???

[jhfozzy]

I can talk to the lads in work Monday morning for you, we should have one lying around somewhere.

Could you upload a pic? just to make sure of the fitment.

John.

[JohnEM]

Have you looked at these? http://www.powerlite-units.com/alternator.htm

I am from near Exeter and have a Pinto Alternator going spare if yours is shot, also a Fiesta one but that's all ECU controlled.
PM me if either is of any use.
John

[tul214]

Flak monkey on locostbuilders can make you one but he might be a bit busy at the moment. Might be worth a u2u?

[henrycrun]

I replaced a BMW belt last week, 21mm wide, 6 grooves
Will try and measure pulley diameter tomorrow
Update - tis only 2" dia- sorry

Edited by henrycrun on Saturday 20th March 11:01

[RemaL]

Found a alrger pully from Burton at 63mm and will fit for £14 plus P&P. If I go Brise, I'm looking at £40+ for a 75MM pully

[jhfozzy]

RemaL said:

Found a alrger pully from Burton at 63mm and will fit for £14 plus P&P. If I go Brise, I'm looking at £40+ for a 75MM pully

You having that one? I'll stop digging through the boxes of pulleys if you are.

[RemaL]

jhfozzy said:

RemaL said:

Found a alrger pully from Burton at 63mm and will fit for £14 plus P&P. If I go Brise, I'm looking at £40+ for a 75MM pully

You having that one? I'll stop digging through the boxes of pulleys if you are.

yea mate thanks for the offer. got the tiger back togeather for the dyno in 2 days time and will order and sort this out when I get back from my holis in Mid April

[jhfozzy]

No probs.

[Rothgo Wooft]

JohnEM said:

Have you looked at these? http://www.powerlite-units.com/alternator.htm
John

Small, light weight, shiny. Cost not much more than new OE jobbers.
I can recommend their light weight starters as well.