118d fault code
118d fault code
Author
Discussion

m12kop

Original Poster:

263 posts

246 months

Friday 19th March 2010
quotequote all
Hi, help needed, just changed oil and filter plus air filter on my 118d 06 reg and now have a fault code of from memory either 3ffi or 3ff1. Any ideas please.

Edited by m12kop on Friday 19th March 18:43

Neil.D

2,878 posts

236 months

Friday 19th March 2010
quotequote all
did the air filter all click back together properly? Air leak?

jhfozzy

1,345 posts

220 months

Friday 19th March 2010
quotequote all
Neil.D said:
did the air filter all click back together properly? Air leak?
+1

3ff1 in my book says Mass air flow sensor.

m12kop

Original Poster:

263 posts

246 months

Friday 19th March 2010
quotequote all
Hi, it was a pain but think it was ok, i'm happy to remove and refit if you think thats a posible cause.

Neil.D

2,878 posts

236 months

Friday 19th March 2010
quotequote all
jhfozzy said:
Neil.D said:
did the air filter all click back together properly? Air leak?
+1

3ff1 in my book says Mass air flow sensor.
Did you connect the MAF back correctly?

m12kop

Original Poster:

263 posts

246 months

Friday 19th March 2010
quotequote all
Yes, looks good, it did have another code which said no.2 glow plug but they both cleared for a day, think i'll check air box and plug in again or should the light go out when fault fixed?

Neil.D

2,878 posts

236 months

Saturday 20th March 2010
quotequote all
Ifthe code has come on straight after taking the intake hoses then start there.

Disconnect everything, give it a good clean, use a small amount of grease/vaseline around the rubber seals and put back together. Always start at the simple + cheap options first!