Haynes build it yourself engine...help please....!
Discussion
Okay, don't laugh (too much!) but the other day I bought one of these models in a moment of curiosity. I've an engineering background but of the aero sort rather than automotive, so thought it might be fun as well as informative to "build" my own engine with moving parts and all that.
Anyway, to cut a long story short, and this is going to sound sad, no matter whether I follow the instructions (which they seem to be very specific in order that it DOES work) or try and do it myself, I cannot for the life of me get the cams and timings set up such that the pistons move and valves open close for the combustion cycle in a way that is actually realistic i.e. suck (intake valve open), squeeze (both valves closed), bang (both valves closed), blow (exhaust valve open). The closest I can get it has the intake and exhaust valve openings swapped (I'm wondering if there was a typo in the manual).
Basically, I'm not convinced that the timings will be right whatever! Anyone else built one of these and had problems??!!
Okay guys, now be gentle, my (engineering) manhood is on the line here! But if I do get it to work I promise to post pics
..... 
Anyway, to cut a long story short, and this is going to sound sad, no matter whether I follow the instructions (which they seem to be very specific in order that it DOES work) or try and do it myself, I cannot for the life of me get the cams and timings set up such that the pistons move and valves open close for the combustion cycle in a way that is actually realistic i.e. suck (intake valve open), squeeze (both valves closed), bang (both valves closed), blow (exhaust valve open). The closest I can get it has the intake and exhaust valve openings swapped (I'm wondering if there was a typo in the manual).
Basically, I'm not convinced that the timings will be right whatever! Anyone else built one of these and had problems??!!
Okay guys, now be gentle, my (engineering) manhood is on the line here! But if I do get it to work I promise to post pics
..... 
Can't help other than to suggest contacting some of the guys on Youtube who have built one:
http://www.youtube.com/watch?v=6TTqsEMbOOk&fea...
http://www.youtube.com/watch?v=xZDkiZwEpEY
http://www.youtube.com/watch?v=-w8knL-U9Gs

http://www.youtube.com/watch?v=6TTqsEMbOOk&fea...
http://www.youtube.com/watch?v=xZDkiZwEpEY
http://www.youtube.com/watch?v=-w8knL-U9Gs

Fastra: I had a look at those and a couple of others, none seem to get in close enough to see what the valves are doing!
Boosted: given how much play the cams have on the camshaft (tolerances are sh!te) it might be a bit of that, but doesn't look like it!
Roscozs: it's a SOHC with rocker arms so unfortunately only one to bugger up!
Honestly, I think it may just be an error in the kit. When I put the cams on as per the instructions (i've been over them 50x, with fresh eyes at points and all), it simply doesn't look anything like it does in the booklet. For a start, in the booklet, the cam pairings (inlet, exhaust) are all about ~150 degs apart, when I put them on _exactly_ as per the instructions, they're ~30 degs apart and can't be fitted any other way to make them look like the pic except for possibly randomly putting some on backwards, but not others. V frustrating....I can see an email going to haynes tomorrow!
Boosted: given how much play the cams have on the camshaft (tolerances are sh!te) it might be a bit of that, but doesn't look like it!
Roscozs: it's a SOHC with rocker arms so unfortunately only one to bugger up!
Honestly, I think it may just be an error in the kit. When I put the cams on as per the instructions (i've been over them 50x, with fresh eyes at points and all), it simply doesn't look anything like it does in the booklet. For a start, in the booklet, the cam pairings (inlet, exhaust) are all about ~150 degs apart, when I put them on _exactly_ as per the instructions, they're ~30 degs apart and can't be fitted any other way to make them look like the pic except for possibly randomly putting some on backwards, but not others. V frustrating....I can see an email going to haynes tomorrow!
Boosted LS1 said:
Do you have 2 one piece camshafts or bits that you assemble to make a camshaft? I ask because your terminology isn't quite clear to me.
basically, there is a metal rod about 15cm long and 2mm wide (camshaft) onto which slide little teardrop-shaped (in profile) pieces of plastic, 1 for each rocker arm (for each valve). The rod has a circular profile with one flat side such that the tear drops can only go on one way and also "hold" the rod as it goes round. I'll try and take a couple of pics quickly....ETA: my camera's too crap, can't take pics.
Edited by Mario149 on Friday 19th March 20:58
Fastra said:
Can't help other than to suggest contacting some of the guys on Youtube who have built one:
http://www.youtube.com/watch?v=6TTqsEMbOOk&fea...
http://www.youtube.com/watch?v=xZDkiZwEpEY
http://www.youtube.com/watch?v=-w8knL-U9Gs

Sorry, but they look a bit crap! http://www.youtube.com/watch?v=6TTqsEMbOOk&fea...
http://www.youtube.com/watch?v=xZDkiZwEpEY
http://www.youtube.com/watch?v=-w8knL-U9Gs


As meentioned there may wel be no time that both valves on a cylinder are shut completely, this is valve overlap and is required as at the low point of cams, as the opening ramp starts to open the valve, the opening speed is so slow, it needs to start opening very early in the cam's rotation.
You may ask why some of the incoming mixture does not get mixed up with the exhaust gas and exit straight out the exhaust? Well it does. Hence cars with a wide overlap have poorer emmissions gernerally.
But again, you may well just have it timed out or stuck the lobes on arse about face!
Edited by poo at Paul's on Friday 19th March 23:46
NiceCupOfTea said:
I got one for Christmas 18 months ago - don't remember having any problems with cam timing...
Want me to take pics?
Yes please! Any close ups of the camshaft with the lobes fitted would be good Want me to take pics?
Unfortunately I think you may have to remove it from the engine so I can see properly!Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff





