Rocker covers
Rocker covers
Author
Discussion

simon818

Original Poster:

94 posts

271 months

Thursday 19th February 2004
quotequote all
Are these the same on all Rover V8's?

Thanks

Simon

yiw1393

23,018 posts

290 months

Thursday 19th February 2004
quotequote all
Yup. Land Rover V8 gaskets - The rubber ones. Can't remember the part number, but there's a right hand one hanging up in my garage in it's wrapper.

Heliox

450 posts

291 months

Thursday 19th February 2004
quotequote all
Urm, their not actually.

Early engines (pre-serp) require the cork gaskets.These cant use the silicone gaskets unless fitted by an experienced bodger.

The newer serpentine rocker covers have a machined base and these use the newer silicone gaskets.

Basically their the same except for the above differences in gasket fitment.

h

simon818

Original Poster:

94 posts

271 months

Thursday 19th February 2004
quotequote all
Sorry to sound....green but how do I tell if I have a serp or not? mine is a 1999 - 400

Thanks

Simon

Nick P

29,977 posts

280 months

Thursday 19th February 2004
quotequote all
let me guess...youve seen a set on ebay?!!!!

tweety

829 posts

288 months

Thursday 19th February 2004
quotequote all
Ssshh- don't tell everyone I want those.

Al.

trefor

14,780 posts

312 months

Thursday 19th February 2004
quotequote all
simon818 said:
Sorry to sound....green but how do I tell if I have a serp or not? mine is a 1999 - 400

Thanks

Simon


You have a Serpentine engine - they came in during mid-late '95.

mongoose

4,360 posts

284 months

Thursday 19th February 2004
quotequote all
simon818 said:
Sorry to sound....green but how do I tell if I have a serp or not? mine is a 1999 - 400

Thanks

Simon
a serpentine engine is so knicknamed because of the belt run resembling a serpent.this belt is a modern type wide belt with 7 or so grooves running along its continual length.the earlier engines were pre-serp and had a traditional thin type fan belt running over the alternator,crank pulley etc in the now old fashioned way,i think,without a tensioner.

simon818

Original Poster:

94 posts

271 months

Thursday 19th February 2004
quotequote all
Thanks for all this advice, sounds like mine is a serpantine!
The rocker covers can be revamped though, I know you can also get exchange ones which is really what my question was for. Thanks for mentioning ones on ebay.

Nick P

29,977 posts

280 months

Friday 20th February 2004
quotequote all
I had an interest in those too...looks like we are all bidding against each other

anonymous-user

83 months

Friday 20th February 2004
quotequote all
Whatever you do don't get them fitted by a main agent, that'll be the best part of £300 and 3 hours labour.

Had mine done after they diagnosed my oil leak was from the covers.

Still leaked oil from somewhere, so took it back.
They tightened up the sump plug which was leaking (from their service) and tightened up the sump bolts.

Guess what, it is leaking from god knows where.

TomPob

280 posts

313 months

Friday 20th February 2004
quotequote all
O....Austec told me mine was leaking...just told them to replace them..thought it would only be a short job..... havn't asked the price...£300 is going to hurt if thats right.

Tom

ssc1

456 posts

290 months

Saturday 21st February 2004
quotequote all
what £300 just to fit a pair of rocker covers , or is that supply and fit