Discussion
mattjones0109 said:
Can anyone recommend any cheapish air filters, not really for performance just for a bit more oomph. Also how to fix the additional cold air feed from the cold air flow to the filter itself?
Any feedback would be good
Thanks
Hi there.Any feedback would be good
Thanks
Sadly cheap is not usually good. Your best bet is to look on the web for a kit designed for your car, such as K&N, ITG or Pipercross.
If no one makes one, then you’ll have to buy a universal kit or fab one up yourself.
But to do something worthwhile (stainless or silicon tubing) probably won’t be cheap either.
Biggest thing is, don’t buy a rubbish filter. Cheap cotton weave and those pointless metal mesh ones are no good at all. Remember a “filters” primary purpose is to filter.
As for extra HP. Well on its own I wouldn’t expect any big gains, but I do disagree that there is nothing to be gained. But it needs to be more than simply replacing the filter. Remember it’s an entire system.
Stock induction setups normally concentrate on noise suppression and refinement. So you need to look at removing any sound baffles and silencers that may be present in the stock setup. Combine this with a freer flowing filter and a cool air duct and it should see an improvement. Combine this with some sensible exhaust modifications and it should dramatically change how the engine drives.
Only thing to watch for is, if you get more cooler air to the engine, the ECU may not know what to do with it. This will cause it to mis-fuel the car, possible creating deadspots, stutters and less power. A re-tune would fix it, but it’s a lot of faffing and money for little returns.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff



and welcome!


Genius!