FRP Engine Conversion Question.
FRP Engine Conversion Question.
Author
Discussion

Somnophore

Original Poster:

1,364 posts

207 months

Sunday 21st March 2010
quotequote all
Hey, my mate has just aquired a bargain FRP that has suffered engine failure. He has been after one for a while but this came up so cheap and otherwise very good condition so he has snapped it up. Originally he wanted to find another FRP engine to put in it, however he has found these are very expensive to come by dueto rarity, and he is also looking at this as an opportunity to try for more power. So, what engines do you think would work? I'm sure I heard of Mk1 Focus RS engine being put in one, what engine would you think would bests suit it for best power, bearing in kind it's still a light FWD hatch/coupe. Any ideas?

Vidal Baboon

9,074 posts

246 months

Sunday 21st March 2010
quotequote all
Without wishing to piss on his bonfire, wouldn't it be cheaper & easier to repair the broken engine?

Custom manifold, exhaust, intercooler pipework etc, etc... You're talking a couple of grand at least on the cheap, and easliy double it for a nice, tidy looking install.
Factor in insurance and other DVLA hoops you may have to jump through, it may not be a good idea.
Not to mention, you're messing with what's'already a rare car. Wouldn't it be best to keep something like that standard?

Pumaspeed would probably be the best people to talke to about it anyway.


What happened, cambelt failure?

Edited by Vidal Baboon on Sunday 21st March 14:53

slomax

7,291 posts

223 months

Sunday 21st March 2010
quotequote all
This thread might interest you. FRP engine implanted into a fiesta. Other than that maybe a mk1 focus rs engine? Although these may be expensive too. Im sure with enough time and effort you could fit almost any 4pot front wheel drive motor in though.

Somnophore

Original Poster:

1,364 posts

207 months

Sunday 21st March 2010
quotequote all
Yes I believe it is a cam belt failure causing damage to all the valves, the engine was reasonably high milage anyway, so he doesn't want to look at rebuilding it really. He knows it's a rare car, but the price of a low milage FRP engine is rediculous, probably be as cheap to get a more poweful engine in and make it a bit of a rocket.

nicky.mattsson

2,639 posts

231 months

Sunday 21st March 2010
quotequote all
How deep are your mates pockets or how handy is he with a set of spanners?

Cossie YB's, Zetec Turbo, CVH, ZVH (CVH with Zetec head) all sorts will fit and have been done before.

I have seen a Mk5 Fiesta ZS with a Focus RS engine (Mk1) and im sure they share the floorpan so that woudl robably fit to.

For something more unusaul why not try a Vauxhall 2 litre Redtop? They seem popular with the Mk 1 and 2 Escort boys......

As the old saying goes, If Ford didnt build it, A bloke in his shed will

Good luck thumbup

Somnophore

Original Poster:

1,364 posts

207 months

Sunday 21st March 2010
quotequote all
He's prolly got around 5k left in his budget for the build, but he'll be doing all the work himself, unless it's something really specialist, as he's a recently qualified mechanic

nicky.mattsson

2,639 posts

231 months

Sunday 21st March 2010
quotequote all
Try this.

Newly built 1.8 Zetec Turbo, if its as good as seller says it would make an interesting project.

nicky.mattsson

2,639 posts

231 months

Sunday 21st March 2010
quotequote all
Failing that, i remember a few years ago at Ford Fair there was a Mk4 Escort Cab in bright yellow with a dodgy electric spolier on the back but a 3 litre V6 and gearbox from a Mondy ST. Im sure it'll fit into the Puma.

http://www.youtube.com/watch?v=1nSss7qBkDI

Edit to add link

Edited by nicky.mattsson on Sunday 21st March 15:31

NiceCupOfTea

25,608 posts

282 months

Sunday 21st March 2010
quotequote all
Somnophore said:
Yes I believe it is a cam belt failure causing damage to all the valves, the engine was reasonably high milage anyway, so he doesn't want to look at rebuilding it really. He knows it's a rare car, but the price of a low milage FRP engine is rediculous, probably be as cheap to get a more poweful engine in and make it a bit of a rocket.
Mrs.NCoT's Puma did a cambelt recently (thanks to a dodgy belt change by a fast fit place) - fortunately only 3 valves damaged. Complete top end rebuild including various ancillaries (water pump) etc. was the best part of 2k at a Ford specialist (Tremona in Southampton).

If he is budgeting that sort of money, why not have the engine rebuilt? I am sure if the rest of the car is good and he spends £5k on a rebuild he could effectively have a new car.

Ross1988

1,234 posts

214 months

Sunday 21st March 2010
quotequote all
http://www.pumapeople.com/forum/index.php

Ask on here as well.

Personally do something with this.

http://www.shawspeed.com/

I've dealt with John from Shawspeed personally and is a top bloke, jusst ring him up and ask him on his opinion, I'm sure he would have some input.

He is a registered trader on ZSOC.com as well, so try and find him on there aswell. Also there plenty of project cars on there for ideas. Search for Youngdan, his car is/was pretty sweet.

Not been on in a while though!



Edited by Ross1988 on Sunday 21st March 16:01