What Alloys Sizes are people running?
Discussion
Boggie said:
Do Monaros share a common PCD and Offset to any 'normal' more common cars?
Yes. PCD is the same as BMW, but Holden run different offsets and flange sizes. Monaro runs an 8" wide wheel front and back, with a 48mm offset.
VXR8 run staggered fitment 8" wide et48 at the front, and 9.5" et57 rears.
Edited by ARAF on Tuesday 23 March 14:14
Trailermasher said:
[quote=kaw]9.5 front and rear 45 offset 20 inch
I couldn't get 9.5's on the front, suspension would be in the way, only got 8-10mm clearance with 20x8's and 245/35-20 tyres.
Would love to put 315's on the rear though.
Will 295's fit on the 9.5 rim width?
[
/quote]with a 45 offset 9.5 rim 275 tyre leaves me about 7 mm gap from front leg mate
ringram said:
Mysty got 295 toyo's on his ok. Ive got 285's on the stock rims which are fine.. just. Almost no room on the inner rear guard. But they have a rim protector on the tire.
The 295's did look a little too wide for the rim.
The 295's did look a little too wide for the rim.
Running 285's on mine as well, bigger looks plain wrong
crisisjez said:
ringram said:
Mysty got 295 toyo's on his ok. Ive got 285's on the stock rims which are fine.. just. Almost no room on the inner rear guard. But they have a rim protector on the tire.
The 295's did look a little too wide for the rim.
Running 285's on mine as well, bigger looks plain wrongThe 295's did look a little too wide for the rim.
kaw said:
with a 45 offset 9.5 rim 275 tyre leaves me about 7 mm gap from front leg mate
I want to keep the original design wheels, so it seems that putting the rears on the front is not a suitable option. Also,I have a GTS, with MRC, so the struts have a larger diameter. Probably put 255's on the front, already only a fingers width between tread and spring seat.crisisjez said:
ringram said:
Mysty got 295 toyo's on his ok. Ive got 285's on the stock rims which are fine.. just. Almost no room on the inner rear guard. But they have a rim protector on the tire.
The 295's did look a little too wide for the rim.
Running 285's on mine as well, bigger looks plain wrongThe 295's did look a little too wide for the rim.
Was thinking of trying the 295 Toyo's (295 less likely to pinch through against the rim), but a 285 with rim protection would be fine.
Going to have to see how yours look at TR, then try a couple and see. The extra diameter of a 295/30 would suit the auto's gearing though.
ninjasta said:
To Answer 007VXR
Yes my car is an 07 VXR8.
I started this thread to collect a set of wheel sizes and offset values that are known to fit or find if any combo's don't work without mods.
the fish does someYes my car is an 07 VXR8.
I started this thread to collect a set of wheel sizes and offset values that are known to fit or find if any combo's don't work without mods.
http://www.monkfishperformance.co.uk/VXR8%20frames...
ninjasta said:
To Answer 007VXR
Yes my car is an 07 VXR8.
I started this thread to collect a set of wheel sizes and offset values that are known to fit or find if any combo's don't work without mods.
In that case, I'm currently running BMW 6 series reps in 3 series staggered format. The fronts are 8" x 19 et35, and the rears are 9" x 19 et40. The fronts are fine, but the rears do touch the arches over undulations, when 4-up. The wheels weigh approx. 7.5 kg less that the originals, EACH!Yes my car is an 07 VXR8.
I started this thread to collect a set of wheel sizes and offset values that are known to fit or find if any combo's don't work without mods.
ninjasta said:
To Answer 007VXR
Yes my car is an 07 VXR8.
I started this thread to collect a set of wheel sizes and offset values that are known to fit or find if any combo's don't work without mods.
Yes my car is an 07 VXR8.
I started this thread to collect a set of wheel sizes and offset values that are known to fit or find if any combo's don't work without mods.
You'll get used to the fact that most threads wander off subject a bit on this forum.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff