Air tools and impact wrenches
Air tools and impact wrenches
Author
Discussion

trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
My old man has a compressor sitting around in the garage, from when we used to restore MG's and the like, that was used exclusively for spray painting.
It now spends it's life sitting there doing bugger all apart from pumping up a tyre or two every so often.

I have the lovely job ahead of me of removing and replacing the wishbones on my MX5, and rather than spending hours swearing at rusted up bolts, I thought about buying an air driven impact wrench.

Anything I need to know? I seem to be able to get a basic one for around £40 and I have a few impact sockets in the halford professional kit I have, so I assume they will be good enough. Do you have to use impact sockets, or will normal sockets be up to the job? Will a basic wrench eat itself within a week? Do all wrenches fit all compressors or are there different lines and connectors needed?

Basically I know bugger all about air tools and want to know if I will just be wasting money buying a basic air wrench smile
The compressor is made by ABAC if that makes any difference.

Rothgo Wooft

157 posts

200 months

Tuesday 23rd March 2010
quotequote all
Wish bones on a '5 doesn't seem like a great excuse to get windy spanners, but they've gotta be a good addition to any workshop.

I've not embarked on the spending journey of air tools (yet), so can't recommend anything.

If you're after a new windy toy, air saws are a bloody marvellous bits of kit.

trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
Rothgo Wooft said:
Wish bones on a '5 doesn't seem like a great excuse to get windy spanners, but they've gotta be a good addition to any workshop.
Shush you... wink

AndrewW-G

11,968 posts

248 months

Tuesday 23rd March 2010
quotequote all
Check the capacity / output of the compressor against the needs of whatever air tools you end up buying, as it will have a very noticeable effect on their performance.
As for the sockets.............only use impact sockets with an impact wrench, they have thicker walls to prevent cracking, standard sockets will do for one off jobs, but wont take much use before splitting or the square drive hole becomes rounded

trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
AndrewW-G said:
Check the capacity / output of the compressor against the needs of whatever air tools you end up buying, as it will have a very noticeable effect on their performance.
As for the sockets.............only use impact sockets with an impact wrench, they have thicker walls to prevent cracking, standard sockets will do for one off jobs, but wont take much use before splitting or the square drive hole becomes rounded
Roger on the capacity check, I believe it has a 255ltr/min capacity and 8bar pressure.

This looks like a good deal to me at under £50 and B&Q is just round the corner
http://www.diy.com/diy/jsp/bq/nav.jsp?action=detai...

AndyS2

869 posts

289 months

Tuesday 23rd March 2010
quotequote all
If your not going to use it much, a £40 gun from Machine Mart will do most things. If you want something with a bit more punch I have one of these and it kicks ass!

http://cgi.ebay.co.uk/SEALEY-SA6002-Air-Impact-Wre...

You really need to check the CFM and tank size on the compressor first.

trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
AndyS2 said:
If your not going to use it much, a £40 gun from Machine Mart will do most things. If you want something with a bit more punch I have one of these and it kicks ass!

http://cgi.ebay.co.uk/SEALEY-SA6002-Air-Impact-Wre...

You really need to check the CFM and tank size on the compressor first.
Our compressor is 9cfm (50 litre tank), whereas that gun states 13cfm, not that i'm going to spend that much straight away, but would the different cfm ratings mean the gun would be useless with our compressor?



Edited by trooperiziz on Tuesday 23 March 19:42

AndyS2

869 posts

289 months

Tuesday 23rd March 2010
quotequote all
trooperiziz said:
AndrewW-G said:
Check the capacity / output of the compressor against the needs of whatever air tools you end up buying, as it will have a very noticeable effect on their performance.
As for the sockets.............only use impact sockets with an impact wrench, they have thicker walls to prevent cracking, standard sockets will do for one off jobs, but wont take much use before splitting or the square drive hole becomes rounded
Roger on the capacity check, I believe it has a 255ltr/min capacity and 8bar pressure.

This looks like a good deal to me at under £50 and B&Q is just round the corner
http://www.diy.com/diy/jsp/bq/nav.jsp?action=detai...
255Ltr/min is about 9CFM so you should be able to run the B & Q gun. I had one of these before the Sealey, looks like the same gun just re-branded. Still going strong today.

http://www.machinemart.co.uk/shop/product/details/...

trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
AndyS2 said:
trooperiziz said:
AndrewW-G said:
Check the capacity / output of the compressor against the needs of whatever air tools you end up buying, as it will have a very noticeable effect on their performance.
As for the sockets.............only use impact sockets with an impact wrench, they have thicker walls to prevent cracking, standard sockets will do for one off jobs, but wont take much use before splitting or the square drive hole becomes rounded
Roger on the capacity check, I believe it has a 255ltr/min capacity and 8bar pressure.

This looks like a good deal to me at under £50 and B&Q is just round the corner
http://www.diy.com/diy/jsp/bq/nav.jsp?action=detai...
255Ltr/min is about 9CFM so you should be able to run the B & Q gun. I had one of these before the Sealey, looks like the same gun just re-branded. Still going strong today.

http://www.machinemart.co.uk/shop/product/details/...
Yup, looks to be the same thing, or at least extremely similar. Off to B&Q tomorrow I think, I'll see if I manage to get out with just the one air tool... biggrin

AndrewW-G

11,968 posts

248 months

Tuesday 23rd March 2010
quotequote all

Eviltad

1,320 posts

210 months

Tuesday 23rd March 2010
quotequote all
I dont know if it'll be any good but the ALDI offers last sunday included a lot of air tool equipment and a compressor. I cant imagine they'll have raced off the shelves.

trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
AndrewW-G said:
I saw that, but it doesn't come with the sockets, the impact sockets I already have only go down to 17mm so i'll need a couple more anyway. They have the same full set with sockets for £50 as B&Q.


trooperiziz

Original Poster:

9,457 posts

283 months

Tuesday 23rd March 2010
quotequote all
Eviltad said:
I dont know if it'll be any good but the ALDI offers last sunday included a lot of air tool equipment and a compressor. I cant imagine they'll have raced off the shelves.
Oooh, Aldi is even closer than B&Q biggrin The joys of living in Milton Keynes, I'll stop and have a look on the way, cheers.


trooperiziz

Original Poster:

9,457 posts

283 months

Wednesday 24th March 2010
quotequote all
Eviltad said:
I dont know if it'll be any good but the ALDI offers last sunday included a lot of air tool equipment and a compressor. I cant imagine they'll have raced off the shelves.
Thanks for that! Just popped out to Aldi.

I am now the proud owner of an impact wrench with sockets, a ratchet with sockets, a set of air shears and an air drill. Total cost for all that = £50! biggrin

Looking at the kit, the wrench seems to be exactly the same unit that is rebadged like everywhere else, but sells for £15 at Aldi rather than £50 at B&Q and Screwfix. No idea how long they will all last, but had to be worth a go at those prices smile


AdeTuono

7,626 posts

258 months

Wednesday 24th March 2010
quotequote all
trooperiziz said:
Eviltad said:
I dont know if it'll be any good but the ALDI offers last sunday included a lot of air tool equipment and a compressor. I cant imagine they'll have raced off the shelves.
Thanks for that! Just popped out to Aldi.

I am now the proud owner of an impact wrench with sockets, a ratchet with sockets, a set of air shears and an air drill. Total cost for all that = £50! biggrin

Looking at the kit, the wrench seems to be exactly the same unit that is rebadged like everywhere else, but sells for £15 at Aldi rather than £50 at B&Q and Screwfix. No idea how long they will all last, but had to be worth a go at those prices smile
For £15, about three uses, I would imagine.

trooperiziz

Original Poster:

9,457 posts

283 months

Wednesday 24th March 2010
quotequote all
AdeTuono said:
trooperiziz said:
Eviltad said:
I dont know if it'll be any good but the ALDI offers last sunday included a lot of air tool equipment and a compressor. I cant imagine they'll have raced off the shelves.
Thanks for that! Just popped out to Aldi.

I am now the proud owner of an impact wrench with sockets, a ratchet with sockets, a set of air shears and an air drill. Total cost for all that = £50! biggrin

Looking at the kit, the wrench seems to be exactly the same unit that is rebadged like everywhere else, but sells for £15 at Aldi rather than £50 at B&Q and Screwfix. No idea how long they will all last, but had to be worth a go at those prices smile
For £15, about three uses, I would imagine.
We shall see smile It has a 3yr warranty anyway and Aldi are pretty good with that sort of thing.

AdeTuono

7,626 posts

258 months

Wednesday 24th March 2010
quotequote all
trooperiziz said:
AdeTuono said:
trooperiziz said:
Eviltad said:
I dont know if it'll be any good but the ALDI offers last sunday included a lot of air tool equipment and a compressor. I cant imagine they'll have raced off the shelves.
Thanks for that! Just popped out to Aldi.

I am now the proud owner of an impact wrench with sockets, a ratchet with sockets, a set of air shears and an air drill. Total cost for all that = £50! biggrin

Looking at the kit, the wrench seems to be exactly the same unit that is rebadged like everywhere else, but sells for £15 at Aldi rather than £50 at B&Q and Screwfix. No idea how long they will all last, but had to be worth a go at those prices smile
For £15, about three uses, I would imagine.
We shall see smile It has a 3yr warranty anyway and Aldi are pretty good with that sort of thing.
It really can't be any worse than Sealey (in my experience). We recently purchased two of these...


They both managed half a dozen 1 3/8" bolts before falling apart or seizing solid. They were returned to Sealey, who said that as they were rusty inside, we'd not been using properly lubricated air. This despite the fact that we used them straight from the shop.

As you say, for £15, it's a disposable piece of kit.

trooperiziz

Original Poster:

9,457 posts

283 months

Wednesday 24th March 2010
quotequote all
AdeTuono said:
As you say, for £15, it's a disposable piece of kit.
Indeed, it looks to be exactly the same as all the £50 versions out there, so better destroying £15 than £50. smile

trooperiziz

Original Poster:

9,457 posts

283 months

Wednesday 24th March 2010
quotequote all
Dooshbag said:
Air wrenches (esp impact wrenches) are notoriously variable in their delivery of torque, great for removing bolts, but invest in a decent torque wrench to be on the safe side when fastening up stuff (Norbar is the brand to look for, not the cheapest though).
I have a pretty decent Torque wrench already, but duly noted, ta smile
I'm mainly going to be using the impact wrench to undo rusted up 15 year old bolts, if it can last long enough to get them all undone, then it will be £15 well spent I think.


tr7v8

7,628 posts

259 months

Wednesday 24th March 2010
quotequote all
Well thanks guys this thread has just cost me 150 quid! biggrin
Spot blaster kit with 2kg grit 9.99
3/8 reversible air drill 9.99
Air shear 12.99
Air filter regulator lubricator 11.99
15M wall mounted air hose 39.99
Motorcycle helmet 39.99

The helmet is for the odd track day as a passenger as I hate wearing sweaty helmets.
The air tools all look very similar to screwfix/machine mart etc. & have a 3 year warranty. Didn't buy the air wrench or compressor cos I already have them but a 2.5HP 25L compressor for around 80 quid appeared to be a bargain.
The rest of the stuff for the 150 odd quid was a peace offering for the missus, smoked salmon, cakes etc.