Rear suspension creak on CV8
Discussion
Anyone had any problems with the Ro's rear suspension? It's an 06 plate CV8.
The passenger rear corner has started creaking on and off load and sounds just like the front top mount bearing problem but obviously theres no bearing onthe rear. What's the likely culprit? Top mount maybe?
Cheers
Mike
The passenger rear corner has started creaking on and off load and sounds just like the front top mount bearing problem but obviously theres no bearing onthe rear. What's the likely culprit? Top mount maybe?
Cheers
Mike
Mines alwya had a "knock" sound from rear ns. Was told its the geometry of the damper - it "gives" at a certain point in its travel and makes a noise. 80k on the clock on standard suspension and nothing out of the ordinary to report.
Having said that if it is a new noise, then maybe you should have a look underneath - just in case.
Having said that if it is a new noise, then maybe you should have a look underneath - just in case.
Wolfracer said:
Mines alwya had a "knock" sound from rear ns. Was told its the geometry of the damper - it "gives" at a certain point in its travel and makes a noise. 80k on the clock on standard suspension and nothing out of the ordinary to report.
Having said that if it is a new noise, then maybe you should have a look underneath - just in case.
Having said that if it is a new noise, then maybe you should have a look underneath - just in case.
ahh right, so probably just normal. I'll give it a check, the handbrake isn't holding on that side either so I'll be under there soon anyway.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



