Discussion
Just orderd some new wheels for my Cerb from a outfit in Oldham Manchester one of the biggest supplers of alloys in the northwest and he recomends them says they are very good tyre. I was going for Toyo or Bridgestone but he said why pay more when these are as good. Not got wheels yet but i am taking the chance with them let you know in 3 weeks if there any good
itiejim said:
...my Cerb came with them and they were horrid - I suspect that they are fine new but go hard quickly.
That was a perfect summation of the Falkens. I used some on mine for a while and they stated off great, but after a while, and few heat cycles, they turned hard as nails, loads of tread left but no traction!Tim
[quote=itiejim]I put a set of these on a BMW 330D and, after worn Pirelli PS2s, I was very pleased with them. However, my Cerb came with them and they were horrid - I suspect that they are fine new but go hard quickly.
Same experience with me. Put on all corners of my little BMW E46, but living in London I didn't use it much and it stood in garage a lot. Developed circumferential cracks on the inner wall of 3 tyres after only a few months. Was advised to replace all of them. They're cheap for a reason!!!
Same experience with me. Put on all corners of my little BMW E46, but living in London I didn't use it much and it stood in garage a lot. Developed circumferential cracks on the inner wall of 3 tyres after only a few months. Was advised to replace all of them. They're cheap for a reason!!!
Interesting, put them on mine last year and was pretty happy with them. Did trip and track day to Spa, Brighton Speed Trials and general driving about - all good and very happy with them. Car has sat over the (very cold) winter and did a track day at Rockingham and wasn't overly happy with the car as it wasn't giving me any confidence - especially after driving a friends Sag on 888's which felt glued in comparison - put it down to Rockingham being a bit damp in the morning but tbh it was dry by the afternoon and car still didn't feel great. Hadn't really thought of it being the tyres due to having been happy with them previously - maybe they have just gone s
t. Back to Toyos then I think.
t. Back to Toyos then I think.djstevec said:
I put a set of these on a BMW 330D and, after worn Pirelli PS2s, I was very pleased with them. However, my Cerb came with them and they were horrid - I suspect that they are fine new but go hard quickly.
itiejim said:
Same experience with me. Put on all corners of my little BMW E46, but living in London I didn't use it much and it stood in garage a lot. Developed circumferential cracks on the inner wall of 3 tyres after only a few months. Was advised to replace all of them. They're cheap for a reason!!!
same here, i left mine for a while and they went very hard - brilliant at first though... now on Asyms Eagle F1's - superbEdited by dean_ratpac on Wednesday 24th March 14:18
The Falken's are a good(ish) tyre, the tyre fitter was right, he's probably fitted them on loads of Hot hatches, but how many Cerbera's? To do justice to a Cerb you really should go for a good tyre. So shop around for ones like Toyo Proxies and Goodyear F1's.
Edited by JensenA on Wednesday 24th March 19:51
Had FK52's on my Cerb when it ran an 11.9 1/4, so no probs there. They went on to do 12k miles with no problems and no issues with "hardness". Also ran these on my 335d with no issues whatsoever (35k miles!!). Quite a few Cerb owners run these tyres and have done for the past few years with no problems until the "hardness" issue that is now being talked about. I found the Toyo's that I used to run on my Cerb to be a "hard" compound that for everyday use was no good. They were ok with a bit of heat in them so it made them fine on empty roads etc.
Jules
Jules
Gassing Station | Cerbera | Top of Page | What's New | My Stuff






