Flat tyre problem any advice?
Discussion
I have a problem with persistant slow punctures leading to flat tyres on a car at work.
The car is a mondeo with Ronal 18 inch split rim looking wheels. The rims are losing air at such a rate that if left for 3 or 4 days one goes flat and two others need extra air.
I have had the car to a Ford main agent and two tyre specialists, none of which could offer a solution.
The tyres are new, the valves are good, the tyres have been taken off the rims, the rims cleaned up with a wire brush and sealant applied, but still three of the tyres go flat. The wheels are true and round with no damage which would cause the leaks.
I have been advised by one place to get the wheels powder coated, and another said don't do it. I think the next step is to get the rims refubished, before I do this has anyone got any suggestions (other than new wheels).
The car is a mondeo with Ronal 18 inch split rim looking wheels. The rims are losing air at such a rate that if left for 3 or 4 days one goes flat and two others need extra air.
I have had the car to a Ford main agent and two tyre specialists, none of which could offer a solution.
The tyres are new, the valves are good, the tyres have been taken off the rims, the rims cleaned up with a wire brush and sealant applied, but still three of the tyres go flat. The wheels are true and round with no damage which would cause the leaks.
I have been advised by one place to get the wheels powder coated, and another said don't do it. I think the next step is to get the rims refubished, before I do this has anyone got any suggestions (other than new wheels).
Wheel off, inflate tyre, cover tyre & rim in warm soapy water. Problem will show its self as some growing bubbles.
3-piece rims can leak where the three pieces of metal are bolted together. A generous smear of silicone sealant around the join (on the inside, normally hidden by the tyre) will cure it. ETA all the way round the circumference of the wheel, not just where its leaking!
However, if metal of the rims cracked, bin it.
3-piece rims can leak where the three pieces of metal are bolted together. A generous smear of silicone sealant around the join (on the inside, normally hidden by the tyre) will cure it. ETA all the way round the circumference of the wheel, not just where its leaking!
However, if metal of the rims cracked, bin it.
Edited by Rothgo Wooft on Thursday 25th March 16:36
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff



ked