Rear adjuster thread size
Rear adjuster thread size
Author
Discussion

hiltonig

Original Poster:

3,153 posts

237 months

Sunday 28th March 2010
quotequote all
Hello chaps, i suspect the rear adjuster threads are picking up, anyone know the thread size so i can run a taps down threads ?

Cheers

hiltonig

Original Poster:

3,153 posts

237 months

Sunday 28th March 2010
quotequote all
Its the thread through the rear wishbone, its the large thread that the adjuster screws into

Ant.

5,254 posts

310 months

Sunday 28th March 2010
quotequote all
It is 1" unf, as Andy says.

BliarOut

72,863 posts

268 months

Sunday 28th March 2010
quotequote all
Use the old adjuster and very gently tap it with a 1/2 lb hammer as it gets stuck then back it off and repeat. It'll sort it wink

hiltonig

Original Poster:

3,153 posts

237 months

Sunday 28th March 2010
quotequote all
BliarOut said:
Use the old adjuster and very gently tap it with a 1/2 lb hammer as it gets stuck then back it off and repeat. It'll sort it wink
Tried that, its not getting any better !! where can i get 1 inch unf taps from ? The old adjuster has some fat threads !!, I have a spare adjuster tho

Edited by hiltonig on Sunday 28th March 20:23

BliarOut

72,863 posts

268 months

Sunday 28th March 2010
quotequote all
Dunno about the tap but if you get really stuck gimme a shout and I'll sort it for ya, there is a definite knack to thread repairs without a tap smash

Del 203

12,728 posts

278 months

Sunday 28th March 2010
quotequote all
Thread file worked a treat for me smile All be it on a smaller dia biggrin

BliarOut

72,863 posts

268 months

Sunday 28th March 2010
quotequote all
Not on an internal thread it won't tongue out

Nige, if you can't get a tap you should be able to get a 'chaser', it's like a sort of thread comb.

Ballistic Banana

14,706 posts

296 months

Sunday 28th March 2010
quotequote all
any help linky

BB

hiltonig

Original Poster:

3,153 posts

237 months

Sunday 28th March 2010
quotequote all
BliarOut said:
Dunno about the tap but if you get really stuck gimme a shout and I'll sort it for ya, there is a definite knack to thread repairs without a tap smash
Cheers 4 that !!, ill give you a buzz tomorrow if thats ok

BliarOut

72,863 posts

268 months

Sunday 28th March 2010
quotequote all
No worries, I'm about all day biggrin

Del 203

12,728 posts

278 months

Sunday 28th March 2010
quotequote all
BliarOut said:
Not on an internal thread it won't tongue out

Nige, if you can't get a tap you should be able to get a 'chaser', it's like a sort of thread comb.
bkss !!! Must read thread when had a beer wink

Ab Shocks

1,686 posts

249 months

Tuesday 30th March 2010
quotequote all
Yep its 1"UNF and I have one at the Gaz factory if anybody wants to borrow it.
I also got Gaz to make me 100 adjusters if anybody wants them £4.00 each

clive f

7,259 posts

262 months

Tuesday 30th March 2010
quotequote all
Ab Shocks said:
Yep its 1"UNF and I have one at the Gaz factory if anybody wants to borrow it.
I also got Gaz to make me 100 adjusters if anybody wants them £4.00 each
hello stranger, wavey long time no typehehe

you ok?