What rating UPS do I need?
Author
Discussion

NiceCupOfTea

Original Poster:

25,608 posts

282 months

Sunday 28th March 2010
quotequote all
I don't need to run much - a NAS, and either another NAS or a USB drive, for long enough to shut down.

My NAS power consumption is rated at 17W.

Would something like this be enough?

bogie

17,108 posts

303 months

Monday 29th March 2010
quotequote all
nothing too big ...but you may as well get a power strip one for all the PC kit

I have the next one up from this

http://www.scan.co.uk/Products/APC-Back-UPS-ES-400...

it will be enough for a NAS/router for 10-15 mins ...and will connect via USB to some NAS for auto shutdown (how it works with my readynas)

lestag

4,614 posts

307 months

Monday 29th March 2010
quotequote all
NiceCupOfTea said:
I don't need to run much - a NAS, and either another NAS or a USB drive, for long enough to shut down.

My NAS power consumption is rated at 17W.

Would something like this be enough?
Be aware that 17 watts is probably a net draw and you need the gross draw at the power plug. Having said that , with 2 NAS's you would probabaly last 40 min easily
How are you going to automagically shut down the NAS? does it have some sort of UPS interface? what brand/model of NAS?

lestag

4,614 posts

307 months

Monday 29th March 2010
quotequote all
The other thing you need to bear in mind with UPS is they generally come in 3 flavours of technology

Offline / standby
Line-interactive
Double-conversion / online

Basically you get what you pay for. The online will suppress far more surges and brown outs than the others, potentially reducing data loss.
Online is what you would use in a data center / server room and if you can afford it and value your data highly, this is what I would buy. ( says he with no UPS smile )

With a limited budget.....line-interactive at the very least esp if you are in an area susceptible to brown outs and outages.

further reading
http://en.wikipedia.org/wiki/Uninterruptible_power...

and an alternative to APC http://powerquality.eaton.com/Products-services/Ba...

NiceCupOfTea

Original Poster:

25,608 posts

282 months

Monday 29th March 2010
quotequote all
Thanks chaps. I have a Buffalo Linkstation NAS which has a USB port and can be shutdown safely.

Does that UPS posted earlier have a USB shutdown capability?

I appreciate what you're all saying but really what I am looking for is some "protection" for my data - I have a surge protector already and will be running regular backups, but ideally would like something that allows it to shutdown safely in the event of an outage (not that we have them often).

Simon Says

19,466 posts

252 months

Monday 29th March 2010
quotequote all
I have only ever used this brand but much bigger,i have had two 2nd used units of Ebay powersellers and in over 3 years have not so much as had to renew the batteries APC are a top quality/corporate brand winkhttp://cgi.ebay.co.uk/APC-Back-ups-CS-350VA-USB-SE... this may do you smile everthing can be shut down with the software via the attached cable.

NiceCupOfTea

Original Poster:

25,608 posts

282 months

Monday 29th March 2010
quotequote all
Interesting - hadn't considered s/h or refurb'ed.

One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?

lestag

4,614 posts

307 months

Monday 29th March 2010
quotequote all
NiceCupOfTea said:
Interesting - hadn't considered s/h or refurb'ed.

One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?
Buy standard multibox, chop off normal wall wart and put on female jug socket. works for me smile
ETA
ie one of these
http://www.stayonline.com/iec320-c14-adapters.aspx

Edited by lestag on Monday 29th March 12:56

NiceCupOfTea

Original Poster:

25,608 posts

282 months

Monday 29th March 2010
quotequote all
Can't see an appropriate adaptor there, but if you mean just stick an IEC socket on the end of a 4-way I guess that would work?

Simon Says

19,466 posts

252 months

Monday 29th March 2010
quotequote all
NiceCupOfTea said:
Interesting - hadn't considered s/h or refurb'ed.

One more question - a lot of them want kettle leads to power the equipment, but that's not much use for things with wall warts - any suggestions?
You need one of these then http://www.revealcable.co.uk/acatalog/info_AA3815....smilehttp://www.powersuppliesonline.co.uk/product/0-70-...wink

Edited by Simon Says on Monday 29th March 13:19

NiceCupOfTea

Original Poster:

25,608 posts

282 months

Monday 29th March 2010
quotequote all
Aha! Although I think I'll make my own and save £25!

Simon Says

19,466 posts

252 months

Monday 29th March 2010
quotequote all
NiceCupOfTea said:
Aha! Although I think I'll make my own and save £25!
Look again scratchchin the 1st one is cheaper here http://www.revealcable.co.uk/acatalog/info_AA3815....

Edited by Simon Says on Monday 29th March 13:50

NiceCupOfTea

Original Poster:

25,608 posts

282 months

Monday 29th March 2010
quotequote all
Simon Says said:
NiceCupOfTea said:
Aha! Although I think I'll make my own and save £25!
Look again scratchchin the 1st one is cheaper here http://www.revealcable.co.uk/acatalog/info_AA3815....

Edited by Simon Says on Monday 29th March 13:50
Yes, noticed the edit!

I think I will still chop up one of my kettle leads and rewire a 4-way though.

Ordered the APC Back-UPS 350EI in the end.

lestag

4,614 posts

307 months

Monday 29th March 2010
quotequote all
NiceCupOfTea said:
Can't see an appropriate adaptor there, but if you mean just stick an IEC socket on the end of a 4-way I guess that would work?
Correct.
The plug will probably cost you more than the 4 way, but overall still cheap.
You can buy a specialist 4 way already built this way but it will be twice the price.