Thanks to VX Burton U Trent
Discussion
Well we've been over to Pentagon VX in Burton Upon Trent today and all i can say is what excellent service. They checked the solenoid on the gear selector to see if that was the cause of the problem but it wasn't. Therefore a new Gearbox has been approved and will be fitted under warranty after easter.
Thanks to Roger (MF) for the advice and Nick Locker at Pentagon for the excellent service.
Thanks to Roger (MF) for the advice and Nick Locker at Pentagon for the excellent service.
Bonnie and Clyde said:
Guys, i've been told the replacement they use is a Tremec gearbox which is used in the Corvette ZR1. The stength is good apparently. Anyone know anything about these??
I was wondering if the standard ones are weak???
I think what they were claiming on the other site you'll get the exact same box as the one you just had, and it happens to be used in the zr1I was wondering if the standard ones are weak???
stigmundfreud said:
Bonnie and Clyde said:
Guys, i've been told the replacement they use is a Tremec gearbox which is used in the Corvette ZR1. The stength is good apparently. Anyone know anything about these??
I was wondering if the standard ones are weak???
I was wondering if the standard ones are weak???
I think what they were claiming on the other site you'll get the exact same box as the one you just had, and it happens to be used in the zr1
Well why was mine shit???Bonnie and Clyde said:
stigmundfreud said:
Bonnie and Clyde said:
Guys, i've been told the replacement they use is a Tremec gearbox which is used in the Corvette ZR1. The stength is good apparently. Anyone know anything about these??
I was wondering if the standard ones are weak???
I was wondering if the standard ones are weak???
I think what they were claiming on the other site you'll get the exact same box as the one you just had, and it happens to be used in the zr1
Well why was mine shit???User error lol
after_shock said:
Bonnie and Clyde said:
stigmundfreud said:
Bonnie and Clyde said:
Guys, i've been told the replacement they use is a Tremec gearbox which is used in the Corvette ZR1. The stength is good apparently. Anyone know anything about these??
I was wondering if the standard ones are weak???
I was wondering if the standard ones are weak???
I think what they were claiming on the other site you'll get the exact same box as the one you just had, and it happens to be used in the zr1
Well why was mine shit???User error lol

Well, while we were away for the week the VXR8 became impossible to get into reverse, so last Monday i called Nick (Locker) at Pentagon to ask for help.
The result being i drove it home, dropped it off with them Tuesday afternoon in the hope that they'd fit the job in. I then took the monaro back up to Col in Wales to finnish the holiday.
I was amazed to get the call off Nick on the Wednesday (less than 24 hours later) to say the R8 had had the new gearbox fitted and the car had been put in a seperate lock up to prevent it getting scratched on the car park.
Again i just wanted to say a huge thank you to Nick Locker and the guys for the second to non service we received.
The result being i drove it home, dropped it off with them Tuesday afternoon in the hope that they'd fit the job in. I then took the monaro back up to Col in Wales to finnish the holiday.
I was amazed to get the call off Nick on the Wednesday (less than 24 hours later) to say the R8 had had the new gearbox fitted and the car had been put in a seperate lock up to prevent it getting scratched on the car park.
Again i just wanted to say a huge thank you to Nick Locker and the guys for the second to non service we received.
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




glad your getting it sorted


When do you pick it up, as they need a VXR8 at Woodbridge on Saturday.