Discussion
Llcoolbc said:
Just had a look at my vxr tyres. I've got 245/35/19 on front and 255/35/19 on rear. I know nothing about tyres so why the difference? Need to replace the rear ones soon, do I just put the same size on again?
the standard tire size is 245/35/19 on VXR rims. for cv8's there 235/40/18I'm still not totally convinced wider rubber adds much difference to traction by itself. Harry was suffering with loads of wheelspin off the line at Thunder Road even with his massive 315 tyres. Tall sidewall, tyre compound and more weight transfer to the rear I suspect plays a bigger factor.
I'm sure Jez, Harry and Roger can throw some more light on the subject.
I'm sure Jez, Harry and Roger can throw some more light on the subject.
If you are looking for break something traction then width and size are most certainly important.
17's are a must
Paul, tyre width is important, thats why dragsters and F1 cars run such wide tyres, but also look at the size of their sidewalls
285's are good to go afaik as I'm looking for a tradeoff of grip V rolling resistance, for me it all starts to happed AFTER the first 1/4mile
Gareth was faster on his road tyres over his drag tyres at TR
17's are a must
Paul, tyre width is important, thats why dragsters and F1 cars run such wide tyres, but also look at the size of their sidewalls
285's are good to go afaik as I'm looking for a tradeoff of grip V rolling resistance, for me it all starts to happed AFTER the first 1/4mile
Gareth was faster on his road tyres over his drag tyres at TR
crisisjez said:
Paul, tyre width is important, thats why dragsters and F1 cars run such wide tyres, but also look at the size of their sidewalls
285's are good to go afaik as I'm looking for a tradeoff of grip V rolling resistance, for me it all starts to happed AFTER the first 1/4mile
Gareth was faster on his road tyres over his drag tyres at TR
F1 cars have wide, low profile tyres so they can go around corners quickly. I also know drag tyres are designed with side walls that actually deform so the foot print changes over speed. Good traction from the start and less rolling resistance as speed rises. Not saying tyre width isn't important but it's not the only thing to consider. Like I said, Harry had loads of wheelspin when I wouldn't have expected hardly any give the size of the things
wormus said:
crisisjez said:
Paul, tyre width is important, thats why dragsters and F1 cars run such wide tyres, but also look at the size of their sidewalls
285's are good to go afaik as I'm looking for a tradeoff of grip V rolling resistance, for me it all starts to happed AFTER the first 1/4mile
Gareth was faster on his road tyres over his drag tyres at TR
F1 cars have wide, low profile tyres so they can go around corners quickly. I also know drag tyres are designed with side walls that actually deform so the foot print changes over speed. Good traction from the start and less rolling resistance as speed rises. Not saying tyre width isn't important but it's not the only thing to consider. Like I said, Harry had loads of wheelspin when I wouldn't have expected hardly any give the size of the things 
285's are good to go afaik as I'm looking for a tradeoff of grip V rolling resistance, for me it all starts to happed AFTER the first 1/4mile

Gareth was faster on his road tyres over his drag tyres at TR


He only did one hundred and eighty! somethingish.Ops - best I go now!
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




oh tempy!!! 