Bleeding the brakes
Bleeding the brakes
Author
Discussion

snowwolf

Original Poster:

11,503 posts

206 months

Saturday 3rd April 2010
quotequote all
Whats the proceedure on bleeding the brakes on a Ro? is it same as other cars, furthest caliper away from reservoir first?

the_ferret82

25,627 posts

215 months

Saturday 3rd April 2010
quotequote all
yes... well thats how i did mine when i fitted my new breaks over a year a go.

snowwolf

Original Poster:

11,503 posts

206 months

Saturday 3rd April 2010
quotequote all
the_ferret82 said:
yes... well thats how i did mine when i fitted my new breaks over a year a go.
ok cheers matey, what brake fluid did you use?

the_ferret82

25,627 posts

215 months

Saturday 3rd April 2010
quotequote all
snowwolf said:
the_ferret82 said:
yes... well thats how i did mine when i fitted my new breaks over a year a go.
ok cheers matey, what brake fluid did you use?
i used 5.1 but 4 works just as good with vxr brakes

S800VXR

5,877 posts

231 months

Sunday 4th April 2010
quotequote all
Are you going to use a vacume bleeder?

ARAF

20,759 posts

254 months

Sunday 4th April 2010
quotequote all
Mick,
I use ATE super blue racing fluid in my BMW. As it's blue rather than clear, it doesn't get DOT approval, but exceeds the performance of DOT4 and is fully compatable with DOT4. As it's coloured, you'll know when your fluid is completely changed.

Monkfish had it on special offer, a couple of months ago.

snowwolf

Original Poster:

11,503 posts

206 months

Sunday 4th April 2010
quotequote all
Cheeers ian. Will look into that. Sounds ideal.

Just going to have someone on the brake and me on the bleed nipple. Whats this vacuum system ?

anonymous-user

85 months

Sunday 4th April 2010
quotequote all
Bleeding the brakes by pumping the brake pedal is ok in theory. But as the master cylinder piston and seals travel further in the master cylinder bore than they do during normal operation, it's possible to knacker the seals.

You can also bleed the brakes by sucking the fluid through at the bleed nipples (vacuume system) but I found that air leaks past the loose nipples (!!) and you're never quite sure that all air has been removed from the system.

My preferred method is to use a Gunsons Eezibleed kit:

www.gunson.co.uk/item.aspx?item=1818

Fits on to the master cylinder reservior cap and pushes fluid through the system at low pressure. It's a one man job you don't need anybody to assist.