part number for vortech supercharger belt
part number for vortech supercharger belt
Author
Discussion

trickas

Original Poster:

61 posts

222 months

Wednesday 7th April 2010
quotequote all
any one know the part number for the supercharger drive belt on a vortech supercharger
the ribbed belt with the ribs at 90 degs to the belt i think 120 teeth just broke mine
been to C A F they ned a part number to find it
thanks steve

SimonV8ster

13,035 posts

259 months

Wednesday 7th April 2010
quotequote all
Could give Mark at Rapid GB a call as he fitted them I believe ?

Well_Fans

4,193 posts

255 months

Thursday 8th April 2010
quotequote all
or look at the vortech site.....

www.vortechsuperchargers.com/product.php?p=66

mym8v8

9,468 posts

226 months

Thursday 8th April 2010
quotequote all
Did you get the sprocket cleaned up Mate?

Vortech site lists only one authorised dealer here:

www.vortechsuperchargers.com/dealers.php?country=GB

Edited by mym8v8 on Thursday 8th April 10:21

stevieturbo

18,105 posts

278 months

Thursday 8th April 2010
quotequote all
There should be some sort of markings on the old belt.


And I'd like to think any decent motorfactors should be able to supply a belt. Its just a toothed belt, nothing special. Just take the old one along. Likely a timing belt of something will fit.


trickas

Original Poster:

61 posts

222 months

Thursday 8th April 2010
quotequote all
i have sorted one through gates.com they make them for vortech and there in the uk
its not a cam belt its an industrial drive belt that why the auto factors couldn't help
here tomorrow £30 delivered
thanks steve

trickas

Original Poster:

61 posts

222 months

Thursday 8th April 2010
quotequote all
i have sorted one through gates.com they make them for vortech and there in the uk
its not a cam belt its an industrial drive belt that why the auto factors couldn't help
here tomorrow £30 delivered
thanks steve

V8HSV

2,457 posts

283 months

Thursday 8th April 2010
quotequote all

stevieturbo

18,105 posts

278 months

Thursday 8th April 2010
quotequote all
A belt is a belt, they just get used for different purposes. But they are all just belts.

Although I think the picture Will posted is for a divorced drive setup, as that indicates a belt length of 1584mm ??

That wouldnt be the same as the short one that piggybacks off the PAS drive which would be much shorter.

GT2 tooth profile, and 8mm pitch.