FAST Intake Manifold
FAST Intake Manifold
Author
Discussion

nosubstitute

Original Poster:

750 posts

213 months

Friday 9th April 2010
quotequote all
I want one of these FAST LSXR 102mm intake manifolds.

Now I know the ETC throttle body fitted to my VZ model is no good but I can't see anyone who makes an electronic throttle body in the required diameter that would allow me to fit this intake manifold?

My motivation behind wanting this intake is to maximise the air flowing into the engine with the idea to change the heads over the longer term but do 'bolt on' bits first plus I like the look of it!

Now I have done loads of searches but come up blank. Surely there must be someone over in the U.S that makes replacement electronic throttle bodies in the required diameter?

rickf_uk

420 posts

219 months

Friday 9th April 2010
quotequote all
See if this helps. I've used these guys before and they're not too bad with shipping costs


http://www.texas-speed.com/shop/item.asp?itemid=10...

monkfish1

12,516 posts

255 months

Friday 9th April 2010
quotequote all
rickf_uk said:
See if this helps. I've used these guys before and they're not too bad with shipping costs


www.texas-speed.com/shop/item.asp?itemid=1091&catid=73


That wont work on an 05 CV8.

MyM8V8

9,468 posts

226 months

Friday 9th April 2010
quotequote all
You need a FAST 90 or 92 for those ports.



In which case a 90mm ETC will do fine and if you want one ported and blended, PM me.


Edited by MyM8V8 on Friday 9th April 16:43

nosubstitute

Original Poster:

750 posts

213 months

Friday 9th April 2010
quotequote all
Is this what you mean?

http://www.lmperformance.com/24163/.html

I guess it must be. What throttle body would I need to get? All the 92mm TBs seem to be cable operated and would I need to get anything else to make it work?

MyM8V8

9,468 posts

226 months

Friday 9th April 2010
quotequote all
Just checked one of my old suppliers, they have this on their site, but I would just check if it is true:

http://www.hinsonsupercars.com/p-1151-fast-lsxr-10...

If this is right, looks as though they now do a version for cathedral heads???

nosubstitute

Original Poster:

750 posts

213 months

Friday 9th April 2010
quotequote all
I am rather green around the gills with this LS stuff but from what I have read I thought the LS1 and LS2 both have cathedral shaped inlet ports and this link

http://www.hinsonsupercars.com/p-1151-fast-lsxr-10...

seems to support this.

I don't want to order anything I can't use obviously but I am not going to ignore the views of a pro, that would be plain stupid.

Can anyone confirm that it is possible to do what I want? Ta, and thanks MyMATEV8 for all your pointers. Much appreciated! Thanks.

well_fans

4,193 posts

255 months

Friday 9th April 2010
quotequote all
monkfish1 said:
rickf_uk said:
See if this helps. I've used these guys before and they're not too bad with shipping costs


www.texas-speed.com/shop/item.asp?itemid=1091&catid=73


That wont work on an 05 CV8.


if its not a stupid question why not? They give the info for the additional bits you need to run it with LS1 injectors and the throttle body harness adaptors. Surely the only thing you'd need would be a larger intake pipe to cope with the bigger throttle body opening? Or am I missing something glaringly obvious again lol.

MyM8V8

9,468 posts

226 months

Friday 9th April 2010
quotequote all
TBH. Having done what I've done, I'm not convinced a standard FAST is good bang for the buck unless you are tracking your car at high RPM's. However, where it will pay dividends, is when you come to install aftermarket heads and you want to blend and port match. This is the real benefit of the Fast as far as I'm concerned.

What I would start with, is to improve the stock air intake, but watch out for the crap that's out there. I would then do the TB which is quite an easy mod if you have good engineering skills and the right kit.

Bear in mind that, IMO, the FAST tends to amplify top end engine noise.

MyM8V8

9,468 posts

226 months

Friday 9th April 2010
quotequote all
well_fans said:
monkfish1 said:
rickf_uk said:
See if this helps. I've used these guys before and they're not too bad with shipping costs


http://www.texas-speed.com/shop/item.asp?itemid=10...
That wont work on an 05 CV8.
if its not a stupid question why not? They give the info for the additional bits you need to run it with LS1 injectors and the throttle body harness adaptors. Surely the only thing you'd need would be a larger intake pipe to cope with the bigger throttle body opening? Or am I missing something glaringly obvious again lol.
The LSXR 102 was originally built for the rectangular ported heads (LS7, LS3, L92) that's why.

Yes you can get an adaptor kit for the FAST LSX 90/92 (I have this on my 6.0 LS2- You also have to move the map sensor location from the front (LS2) to the back of the engine which requires some soldering and rewiring.)

MyM8V8

9,468 posts

226 months

Friday 9th April 2010
quotequote all
nosubstitute said:
I am rather green around the gills with this LS stuff but from what I have read I thought the LS1 and LS2 both have cathedral shaped inlet ports and this link

http://www.hinsonsupercars.com/p-1151-fast-lsxr-10...

seems to support this.

I don't want to order anything I can't use obviously but I am not going to ignore the views of a pro, that would be plain stupid.

Can anyone confirm that it is possible to do what I want? Ta, and thanks MyMATEV8 for all your pointers. Much appreciated! Thanks.
I think the Yanks tend to get stuff mixed up. I would email the guys there (who have always been very helpful) and ask them if the LSXR 102 advertised on their site is actually suitable for the LS catherdral port heads.

It's quite conceivable that there is a new bottom moulding made for them. I don't know myself. But £600 is a lot to blow if it ain't right!

monkfish1

12,516 posts

255 months

Saturday 10th April 2010
quotequote all
well_fans said:
monkfish1 said:
rickf_uk said:
See if this helps. I've used these guys before and they're not too bad with shipping costs


www.texas-speed.com/shop/item.asp?itemid=1091&catid=73


That wont work on an 05 CV8.


if its not a stupid question why not? They give the info for the additional bits you need to run it with LS1 injectors and the throttle body harness adaptors. Surely the only thing you'd need would be a larger intake pipe to cope with the bigger throttle body opening? Or am I missing something glaringly obvious again lol.


Wrong TB.

MyM8V8

9,468 posts

226 months

Saturday 10th April 2010
quotequote all
monkfish1 said:
well_fans said:
monkfish1 said:
rickf_uk said:
See if this helps. I've used these guys before and they're not too bad with shipping costs


http://www.texas-speed.com/shop/item.asp?itemid=10...
That wont work on an 05 CV8.
if its not a stupid question why not? They give the info for the additional bits you need to run it with LS1 injectors and the throttle body harness adaptors. Surely the only thing you'd need would be a larger intake pipe to cope with the bigger throttle body opening? Or am I missing something glaringly obvious again lol.
Wrong TB.
Why couldn't he just get a larger TB as well?

anonymous-user

85 months

Saturday 10th April 2010
quotequote all
Mines a VZ CV8 and I have one of these:



It's made by PWR and uses an upgraded version of the original servo motor. Also, the inlet is oval so it fits under the bonnet more easily.

Alternatively you can run an LS2 TB on a LS1 with a converter like this: www.lmperformance.com/7687/4.html

Edited by anonymous-user on Saturday 10th April 09:54

monkfish1

12,516 posts

255 months

Saturday 10th April 2010
quotequote all
MyM8V8 said:
monkfish1 said:
well_fans said:
monkfish1 said:
rickf_uk said:
See if this helps. I've used these guys before and they're not too bad with shipping costs


www.texas-speed.com/shop/item.asp?itemid=1091&catid=73


That wont work on an 05 CV8.


if its not a stupid question why not? They give the info for the additional bits you need to run it with LS1 injectors and the throttle body harness adaptors. Surely the only thing you'd need would be a larger intake pipe to cope with the bigger throttle body opening? Or am I missing something glaringly obvious again lol.


Wrong TB.


Why couldn't he just get a larger TB as well?


05 CV8 has a unique setup, hence why wornus has what he has on his. The "normal" electronic throttle wont work with an 05 CV8