Performance intake question
Discussion
Anyone got any good articles or comments on the extra power increase you get from running a MAFless system?
I have a 85mm MAF Sensor at present and airbox mod to allow the extra airflow.
Do i need to remove the MAF and put on the direct air feed to try it with out or just unplug and remap as is???
I have a 85mm MAF Sensor at present and airbox mod to allow the extra airflow.
Do i need to remove the MAF and put on the direct air feed to try it with out or just unplug and remap as is???
should get away with remap with it in place and unplugged or removed. something at the back of my brain tells me I read an article somewhere about the benefits of leaving it in but disconnected as the mesh helps "shape" the airflow more than it restricts things. Could be talking a load of bollox mind you but might be worth a rummage on some of the LS1 tech forums see what the consensus is.
well_fans said:
should get away with remap with it in place and unplugged or removed. something at the back of my brain tells me I read an article somewhere about the benefits of leaving it in but disconnected as the mesh helps "shape" the airflow more than it restricts things. Could be talking a load of b
ks mind you but might be worth a rummage on some of the LS1 tech forums see what the consensus is.
I think the laminar flow was required to provide a consistant reading over the heated wires (of the MAF).
ks mind you but might be worth a rummage on some of the LS1 tech forums see what the consensus is.Kaws LS2 VXR8 was mapped mafless with the maf left in until his Dus OTR arrived. He managed to get into the 12's with that setup.
I'm now running mafless and looking forward to getting some figures at TVR tomorrow. The only figures I can give you are that at the last TR running with maf I made 158.7 MPH ( and a 12.5 1/4)and at the last one running mafless made 165.8 or so with a 12.4 1/4.
Edited by MyM8V8 on Friday 9th April 18:54
MAFless, why? If you remove the MAF (connector) depending on model you also lose your IAT sensor too so you need to check on that. If you had a tune tool there are several ways of disabling maf but if you just unplug it you'll get a CEL and the car will fall back on just using the VE table which by default is on LS1's way off. If you want to go mafless you can buy an off the shelf tune like Kaw did or you can tune your ve table yourself.
Going mafless but not removing the MAF is pointless as the restriction to airflow is still there but really you are chasing a few ponies for what? SD for ultimate power tunes but then you need to over time make adjustments thats what the MAF helps to take care of. Want a better feeling to throttle? Disable LTFT and let the O2's just provide STFT and you'll get a much better throttle response.
Seriously chasing a few ponies aint worth it is it? Big power yes but on a standardish car no
Going mafless but not removing the MAF is pointless as the restriction to airflow is still there but really you are chasing a few ponies for what? SD for ultimate power tunes but then you need to over time make adjustments thats what the MAF helps to take care of. Want a better feeling to throttle? Disable LTFT and let the O2's just provide STFT and you'll get a much better throttle response.
Seriously chasing a few ponies aint worth it is it? Big power yes but on a standardish car no
stigmundfreud said:
MAFless, why? If you remove the MAF (connector) depending on model you also lose your IAT sensor too so you need to check on that. If you had a tune tool there are several ways of disabling maf but if you just unplug it you'll get a CEL and the car will fall back on just using the VE table which by default is on LS1's way off. If you want to go mafless you can buy an off the shelf tune like Kaw did or you can tune your ve table yourself.
Going mafless but not removing the MAF is pointless as the restriction to airflow is still there but really you are chasing a few ponies for what? SD for ultimate power tunes but then you need to over time make adjustments thats what the MAF helps to take care of. Want a better feeling to throttle? Disable LTFT and let the O2's just provide STFT and you'll get a much better throttle response.
Seriously chasing a few ponies aint worth it is it? Big power yes but on a standardish car no
Going mafless but not removing the MAF is pointless as the restriction to airflow is still there but really you are chasing a few ponies for what? SD for ultimate power tunes but then you need to over time make adjustments thats what the MAF helps to take care of. Want a better feeling to throttle? Disable LTFT and let the O2's just provide STFT and you'll get a much better throttle response.
Seriously chasing a few ponies aint worth it is it? Big power yes but on a standardish car no
Well im looking at remap software to dial in my car even more and for diagnostics. Also with mods as i move forward i can tune it myself.
My intake is opened out bar the TB. with 85mm MAF im bigger than the plenum opening anyway.
Hence the wondering if i remap MAFless whether i will gain any extra. And on top that if i need to get something like the OTRCAI or is it not worth the extra cash given my open intake?
behold81 said:
Thats interesting...
Although (And i could be wrong) the removing of the MAF sensor is to make the maping more accurate as the MAF can give delayed/incorrect results causing a lag/loss in power...
Although (And i could be wrong) the removing of the MAF sensor is to make the maping more accurate as the MAF can give delayed/incorrect results causing a lag/loss in power...
What if it is right in front of the TB,( more info the better maybe) thinking I will pick one of these intakes up and do a write up with a few dyno runs, have a 4inch pipe custome box and K & N filter setup currently, will be interesting to run the diff setups, may even pull old standard back out.
behold81 said:
So you need the following....
Standard
MAF with intake
MAF less with same intake.
Be interesting results....
Standard
MAF with intake
MAF less with same intake.
Be interesting results....
I will order the intake tomorrow (who knows when it will get to Sweden) and download a MAFLESS tune. Now to find a local DYNO thats not full of Volvo's.
Will keep u updated.
Excuse my ignorance, but the vehicle has a map sensor so I dont really see the issue. Previous vehicles I have owned many have dropped the MAF, in favour of a MAP sensor, many tuners prefer tuning MAP than MAF and get far better results. IMHO the MAF is only there to correct lazy mapping, ala your example of the standard LS2 tables.
Vez said:
Excuse my ignorance, but the vehicle has a map sensor so I dont really see the issue. Previous vehicles I have owned many have dropped the MAF, in favour of a MAP sensor, many tuners prefer tuning MAP than MAF and get far better results. IMHO the MAF is only there to correct lazy mapping, ala your example of the standard LS2 tables.
Glad someone is on my wavelength....
stigmundfreud said:
drew ss said:
theres thousands of mafless tunes running around aus so there m,ust be somethin there
yes a standard consistent climate and a constant atmospheric rangeMAP = Pressure IAT = Temperature so why doesnt mafless work 100%? If you cover both aspects youspeak of!?
Answer = pathetic feeble tuning efforts.
MAF vs Mafless with the right diameter MAF meter will be zero power difference.
But MAF does not measure airflow in a linear manner, its a geometric curve, so only midrange is it most accurate, at low and high airflow it looses resolution. Mafless works well off throttle at low airflow. You get a more responsive vehicle. OEM ECU's do not use the maf 100% at low airflow settings. MAF is only 100% used over 4000rpm in the OEM tune.
Vez said:
Excuse my ignorance, but the vehicle has a map sensor so I dont really see the issue. Previous vehicles I have owned many have dropped the MAF, in favour of a MAP sensor, many tuners prefer tuning MAP than MAF and get far better results. IMHO the MAF is only there to correct lazy mapping, ala your example of the standard LS2 tables.
Amen Jesus 
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


